add bcst testcase

src/qualification/GAP/BROB/BCST/test_bcst.py

@@ -0,0 +1,100 @@
+"""
+GAP/BROB/BCST/BV-01-C: Broadcaster role with non-connectable advertising.
+
+Advertising with TSPX_advertising_data value (27 bytes):
+- Flags: BR/EDR Not Supported
+- 16-bit Service UUIDs: 0x1800, 0x1801
+- Local Name: "PTS-GAP-06B8"
+- Appearance: 0x0000
+"""
+
+import asyncio
+import logging
+import os
+
+import bumble.device
+import bumble.transport
+from bumble import hci
+from bumble.device import DeviceConfiguration, AdvertisingParameters, AdvertisingEventProperties
+
+
+async def run_broadcaster():
+    """Configure and start non-connectable advertising for GAP/BROB/BCST/BV-01-C."""
+
+    # Transport - adjust as needed for your setup
+    transport_str = "serial:/dev/ttyAMA3,1000000,rtscts"
+
+    async with await bumble.transport.open_transport(transport_str) as (hci_source, hci_sink):
+        # Device configuration
+        device_config = DeviceConfiguration(
+            name="PTS-GAP-06B8",
+            address=hci.Address("F0:F1:F2:F3:F4:F5"),
+        )
+
+        device = bumble.device.Device.from_config_with_hci(
+            device_config,
+            hci_source,
+            hci_sink,
+        )
+        await device.power_on()
+
+        # Exact advertising data payload (27 bytes) as specified:
+        # 0x02, 0x01, 0x04                             - Flags: BR/EDR Not Supported
+        # 0x05, 0x03, 0x00, 0x18, 0x01, 0x18           - 16-bit Service UUIDs: 0x1800, 0x1801
+        # 0x0D, 0x09, 0x50, 0x54, 0x53, 0x2D, 0x47,    - Complete Local Name: "PTS-GAP-06B8"
+        #       0x41, 0x50, 0x2D, 0x30, 0x36, 0x42, 0x38
+        # 0x03, 0x19, 0x00, 0x00                       - Appearance: 0x0000
+        adv_data = bytes([
+            0x02, 0x01, 0x04,                               # Flags: BR/EDR Not Supported
+            0x05, 0x03, 0x00, 0x18, 0x01, 0x18,             # 16-bit Service UUIDs
+            0x0D, 0x09, 0x50, 0x54, 0x53, 0x2D, 0x47, 0x41, # Local Name: "PTS-GAP-06B8"
+            0x50, 0x2D, 0x30, 0x36, 0x42, 0x38,
+            0x03, 0x19, 0x00, 0x00                          # Appearance
+        ])
+
+        logging.info("Advertising data (%d bytes): %s", len(adv_data), adv_data.hex())
+
+        # Create advertising set with non-connectable parameters (ADV_NONCONN_IND equivalent)
+        advertising_set = await device.create_advertising_set(
+            advertising_parameters=AdvertisingParameters(
+                advertising_event_properties=AdvertisingEventProperties(
+                    is_connectable=False,      # Non-connectable (ADV_NONCONN_IND)
+                    is_scannable=False,        # Not scannable
+                    is_directed=False,
+                    is_high_duty_cycle_directed_connectable=False,
+                    is_legacy=True,            # Use legacy advertising PDUs
+                    is_anonymous=False,
+                ),
+                primary_advertising_interval_min=0x0800,  # 1.28s
+                primary_advertising_interval_max=0x0800,  # 1.28s
+                primary_advertising_phy=hci.Phy.LE_1M,
+            ),
+            advertising_data=adv_data,
+            auto_start=True,
+        )
+
+        logging.info("Non-connectable advertising started (ADV_NONCONN_IND)")
+        logging.info("Advertising set handle: %s", advertising_set.advertising_handle)
+
+        # Keep advertising until interrupted
+        logging.info("Press Ctrl+C to stop...")
+        try:
+            while True:
+                await asyncio.sleep(1)
+        except asyncio.CancelledError:
+            pass
+        finally:
+            await advertising_set.stop()
+            logging.info("Advertising stopped")
+
+
+if __name__ == "__main__":
+    logging.basicConfig(
+        level=os.environ.get("LOG_LEVEL", logging.INFO),
+        format="%(module)s.py:%(lineno)d %(levelname)s: %(message)s",
+    )
+
+    try:
+        asyncio.run(run_broadcaster())
+    except KeyboardInterrupt:
+        logging.info("Interrupted by user")