tcl: fix remaining scripts after rework adapter commands

Some script have been added or modified after the patches for
reworking the adapter commands were pushed in gerrit.
Such scripts use the old command syntax and trigger a "deprecated"
warning at runtime.

Fix them with the same sed commands used for the other scripts:
	sed -i 's/^interface /adapter driver /' $(find tcl/ -type f)
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Change-Id: I0824d6c506a9af3eb9129b74c02a92b4eb1b100d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5424
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: jenkins

tcl/target/infineon/tle987x.cfg

@@ -33,4 +33,4 @@ if { ![using_hla] } {
 	cortex_m reset_config sysresetreq
 }
 
-adapter_khz 1000
+adapter speed 1000

tcl/target/stm32wbx.cfg

@@ -55,9 +55,9 @@ flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME
 #
 # Note that there is a pretty wide band where things are
 # more or less stable, see http://openocd.zylin.com/#/c/3366/
-adapter_khz 500
+adapter speed 500
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 if {[using_jtag]} {
  jtag_ntrst_delay 100
 }
@@ -77,12 +77,12 @@ $_TARGETNAME configure -event reset-init {
     mmw 0x58004000 0x00000102 0  ;# FLASH_ACR |= PRFTBE | 2(Latency)
     mmw 0x58000000 0x00000091 0  ;# RCC_CR = MSI_ON | MSI Range 24 MHz
     # Boost JTAG frequency
-    adapter_khz 4000
+    adapter speed 4000
 }
 
 $_TARGETNAME configure -event reset-start {
     # Reset clock is MSI (4 MHz)
-    adapter_khz 500
+    adapter speed 500
 }
 
 $_TARGETNAME configure -event examine-end {

tcl/target/swm050.cfg

@@ -29,7 +29,7 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME swm050 0x0 0x2000 0 0 $_TARGETNAME
 
-adapter_khz 1000
+adapter speed 1000
 
 $_TARGETNAME configure -event reset-init {
 	# Stop the watchdog, just to be safe