target/cortex_a: add support for watchpoints

The current implementation of OpenOCD does not support watchpoints for
cortex_a architecture. So, I replaced the add_watchpoint and
remove_watchpoint with the specific implementation for the
cortex a and using the breakpoint implementation and the arm
documentation [1] as reference. In particular, I have made the
following changes:

* added the following functions

- cortex_a_add_watchpoint
  This wrapper function check whether there are any watchpoint
  available on the target device by calling cortex_a_set_watchpoint.

- cortex_a_set_watchpoint
  This function is responsible for settings the watchpoint register
  pair. In particular, it sets the WVR and the WCR registers with
  the cortex_a_dap command.

- cortex_a_remove_watchpoint
  This wrapper function the selected watchpoint on the target device
  by calling cortex_a_unset_watchpoint.

- cortex_a_unset_watchpoint
  This function sets both the WVR and the WCR registers to zero, thus
  unsetting the watchpoint.

[1]
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0464f/BCGDHIEJ.html

Change-Id: I86611dab474cb84836662af572b17636dc68e282
Signed-off-by: Chengyu Zheng <chengyu.zheng@polimi.it>
Reviewed-on: http://openocd.zylin.com/3913
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins

src/target/armv7a.c

@@ -570,8 +570,6 @@ int armv7a_arch_state(struct target *target)
 
 	if (arm->core_mode == ARM_MODE_ABT)
 		armv7a_show_fault_registers(target);
-	if (target->debug_reason == DBG_REASON_WATCHPOINT)
-		LOG_USER("Watchpoint triggered at PC " TARGET_ADDR_FMT, armv7a->dpm.wp_addr);
 
 	return ERROR_OK;
 }