auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ADIv5 clean up AP selection and register caching

Browse Source 
Handling of AP (and AP register bank) selection, and cached AP
registers, is pretty loose ... start tightening it:

 - It's "AP bank" select support ... there are no DP banks.  Rename.
   + dap_dp_bankselect() becomes dap_ap_bankselect()
   + "dp_select_value" struct field becomes "ap_bank_value"

 - Remove duplicate AP cache init paths ... only use dap_ap_select(),
 and don't make Cortex (A8 or M3) cores roll their own code.

 - For dap_ap_bankselect(), pass up any fault code from writing
 the SELECT register.  (Nothing yet checks those codes.)

 - Add various bits of Doxygen

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This commit is contained in:
David Brownell
2010-02-21 14:48:04 -08:00
parent 1aac72d243
commit 249263d29d
4 changed files with 60 additions and 34 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
src/target/arm_adi_v5.h
View File

@@ -138,17 +138,45 @@ struct swjdp_common
struct arm_jtag *jtag_info;
/* Control config */
uint32_t dp_ctrl_stat;
/* Support for several AP's in one DAP */
/**
* Cache for DP_SELECT bits identifying the current AP. A DAP may
* connect to multiple APs, such as one MEM-AP for general access,
* another reserved for accessing debug modules, and a JTAG-DP.
* "-1" indicates no cached value.
*/
uint32_t apsel;
/* Register select cache */
uint32_t dp_select_value;
/**
* Cache for DP_SELECT bits identifying the current four-word AP
* register bank. This caches AP register addresss bits 7:4; JTAG
* and SWD access primitves pass address bits 3:2; bits 1:0 are zero.
* "-1" indicates no cached value.
*/
uint32_t ap_bank_value;
/**
* Cache for (MEM-AP) AP_REG_CSW register value. This is written to
* configure an access mode, such as autoincrementing AP_REG_TAR during
* word access. "-1" indicates no cached value.
*/
uint32_t ap_csw_value;
/**
* Cache for (MEM-AP) AP_REG_TAR register value This is written to
* configure the address being read or written
* "-1" indicates no cached value.
*/
uint32_t ap_tar_value;
/* information about current pending SWjDP-AHBAP transaction */
uint8_t trans_mode;
uint8_t trans_rw;
uint8_t ack;
/* extra tck clocks for memory bus access */
/**
* Configures how many extra tck clocks are added after starting a
* MEM-AP access before we try to read its status (and/or result).
*/
uint32_t memaccess_tck;
/* Size of TAR autoincrement block, ARM ADI Specification requires at least 10 bits */
uint32_t tar_autoincr_block;