tcl/target: Move TI targets to ti folder

Move the ti targets to a TI folder. Since the folder is ti, we can
drop the "ti" prefix from the files themselves.

Done via the following script:

 mkdir target/ti
 FILES=`ls target/ti*.cfg target/omap*.cfg target/am335x.cfg
           target/amdm37x.cfg target/icepick.cfg target/stellaris.cfg
		   target/davinci.cfg`
 for cname in $FILES
 do
   bname=`basename $cname`
   nname=`echo $bname|sed -e "s/^ti-//g"|sed -e "s/ti_//g"`
   npath="target/ti/$nname"
   echo "$cname => $npath"
   fref=`git grep $cname .|cut -d ':' -f1|sort -u`
   sed -i -e "s&$cname&$npath&g" $fref
   git mv $cname $npath
 done

Change-Id: I9f94dc6bb01f73721d4ff96be92cb51de2cbf0e2
Suggested-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/9203
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl/target/ti/calypso.cfg

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# TI Calypso (lite) G2 C035 Digital Base Band chip
+#
+# ARM7TDMIE + DSP subchip (S28C128)
+#
+# 512K SRAM Calypso
+# 256K SRAM Calypso lite
+#
+if { [info exists CHIPNAME] } {
+	set  _CHIPNAME $CHIPNAME
+} else {
+	set  _CHIPNAME calypso
+}
+
+if { [info exists ENDIAN] } {
+	set  _ENDIAN $ENDIAN
+} else {
+	set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {
+	set _CPUTAPID $CPUTAPID
+} else {
+	set _CPUTAPID 0x3100e02f
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 64kB
+if { [info exists WORKAREASIZE] } {
+	set _WORKAREASIZE $WORKAREASIZE
+} else {
+	set _WORKAREASIZE 0x10000
+}
+
+adapter speed 1000
+
+reset_config trst_and_srst
+
+jtag newtap $_CHIPNAME dsp -expected-id 0x00000000 -irlen 8
+jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+# target
+
+set _TARGETNAME $_CHIPNAME.arm
+target create $_TARGETNAME arm7tdmi -endian little -chain-position $_TARGETNAME
+
+# workarea
+
+$_TARGETNAME configure -work-area-phys 0x00800000 -work-area-size $_WORKAREASIZE -work-area-backup 1
+
+arm7_9 dcc_downloads enable
+arm7_9 fast_memory_access enable
+
+$_TARGETNAME configure -event examine-start {
+	irscan calypso.arm 0x0b -endstate DRPAUSE
+	drscan calypso.arm 2 2 -endstate RUN/IDLE
+}