auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

"reset" without arguments now execute a "reset run".

Browse Source 
the reset mode argument to the target command is deprecated(ignored w/error message).

git-svn-id: svn://svn.berlios.de/openocd/trunk@832 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This commit is contained in:
oharboe
2008-07-18 14:43:29 +00:00
parent 2c3f0ebae9
commit 35e84a2a25
2 changed files with 27 additions and 38 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
doc/openocd.texi
View File

@@ -516,7 +516,7 @@ Currently, there are no options available for the ep93xx interface.
@section Target configuration
@itemize @bullet
@item @b{target} <@var{type}> <@var{endianess}> <@var{reset_mode}> <@var{JTAG pos}>
@item @b{target} <@var{type}> <@var{endianess}> <@var{JTAG pos}>
<@var{variant}>
@cindex target
Defines a target that should be debugged. Currently supported types are:
@@ -538,29 +538,6 @@ target board
Endianess may be @option{little} or @option{big}.
The reset_mode specifies what should happen to the target when a reset occurs:
@itemize @minus
@item @b{reset_halt}
@cindex reset_halt
Immediately request a target halt after reset. This allows targets to be debugged
from the very first instruction. This is only possible with targets and JTAG
interfaces that correctly implement the reset signals.
@item @b{reset_init}
@cindex reset_init
Similar to @option{reset_halt}, but executes the script file defined to handle the
'reset' event for the target. Like @option{reset_halt} this only works with
correct reset implementations.
@item @b{reset_run}
@cindex reset_run
Simply let the target run after a reset.
@item @b{run_and_halt}
@cindex run_and_halt
Let the target run for some time (default: 1s), and then request halt.
@item @b{run_and_init}
@cindex run_and_init
A combination of @option{reset_init} and @option{run_and_halt}. The target is allowed
to run for some time, then halted, and the @option{reset} event script is executed.
@end itemize
On JTAG interfaces / targets where system reset and test-logic reset can't be driven
completely independent (like the LPC2000 series), or where the JTAG interface is
@@ -591,7 +568,7 @@ a working_area that doesn't need to be backed up, as performing a backup slows d
@subsection arm7tdmi options
@cindex arm7tdmi options
target arm7tdmi <@var{endianess}> <@var{reset_mode}> <@var{jtag#}>
target arm7tdmi <@var{endianess}> <@var{jtag#}>
The arm7tdmi target definition requires at least one additional argument, specifying
the position of the target in the JTAG daisy-chain. The first JTAG device is number 0.
The optional [@var{variant}] parameter has been removed in recent versions.
@@ -829,12 +806,15 @@ OpenOCD will wait 5 seconds for the target to resume.
@cindex step
Single-step the target at its current code position, or at an optional address.
@item @b{reset} [@option{run}|@option{halt}|@option{init}|@option{run_and_halt}
|@option{run_and_init}]
@cindex reset
Perform a hard-reset. The optional parameter specifies what should happen after the reset.
This optional parameter overrides the setting specified in the configuration file,
making the new behaviour the default for the @option{reset} command.
With no arguments a "reset run" is executed
@itemize @minus
@item @b{run}
@cindex reset run