- Fixes '==' whitespace

- Replace ')\(==\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2371 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/flash/at91sam7.c

@@ -284,7 +284,7 @@ static int at91sam7_flash_command(struct flash_bank_s *bank, uint8_t cmd, uint16
 	target_write_u32(target, MC_FCR[bank->bank_number], fcr);
 	LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: %u", fcr, bank->bank_number+1, pagen);
 
-	if ((at91sam7_info->cidr_arch == 0x60) && ((cmd==SLB)|(cmd==CLB)))
+	if ((at91sam7_info->cidr_arch == 0x60) && ((cmd == SLB)|(cmd == CLB)))
 	{
 		/* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
 		if (at91sam7_wait_status_busy(bank, MC_FSR_EOL, 10)&0x0C)

src/flash/flash.c

@@ -654,7 +654,7 @@ static int handle_flash_write_image_command(struct command_context_s *cmd_ctx, c
 	/* flash auto-erase is disabled by default*/
 	int auto_erase = 0;
 
-	if (strcmp(args[0], "erase")==0)
+	if (strcmp(args[0], "erase") == 0)
 	{
 		auto_erase = 1;
 		args++;
@@ -894,7 +894,7 @@ static int handle_flash_write_bank_command(struct command_context_s *cmd_ctx, ch
 		fileio_close(&fileio);
 		return retvaltemp;
 	}
-	if (retval==ERROR_OK)
+	if (retval == ERROR_OK)
 	{
 	command_print(cmd_ctx, 
 				  "wrote  %lld byte from file %s to flash bank %li at offset 0x%8.8" PRIx32 " in %s (%f kb/s)",

src/flash/ocl.c

@@ -172,7 +172,7 @@ static int ocl_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset
 	int i;
 
 	/* check preconditions */
-	if (ocl->buflen == 0 || ocl->bufalign==0)
+	if (ocl->buflen == 0 || ocl->bufalign == 0)
 		return ERROR_FLASH_BANK_NOT_PROBED;
 
 	if (bank->target->state != TARGET_RUNNING)
@@ -373,7 +373,7 @@ static int ocl_auto_probe(struct flash_bank_s *bank)
 {
 	ocl_priv_t *ocl = bank->driver_priv;
 
-	if (ocl->buflen == 0 || ocl->bufalign==0)
+	if (ocl->buflen == 0 || ocl->bufalign == 0)
 		return ERROR_FLASH_BANK_NOT_PROBED;
 
 	return ERROR_OK;

src/flash/ocl/at91sam7x/dcc.c

@@ -27,7 +27,7 @@ uint32 dcc_rd(void)
 
 	do {
 		asm volatile ("mrc p14, 0, %0, C0, C0" : "=r" (dcc_reg) : );
-	} while ((dcc_reg&1)==0);
+	} while ((dcc_reg&1) == 0);
 
 	asm volatile ("mrc p14, 0, %0, C1, C0" : "=r" (dcc_reg) : );
 	return dcc_reg;

src/flash/ocl/at91sam7x/samflash.c

@@ -86,7 +86,7 @@ int flash_page_program(uint32 *data, int page_num)
 	else efc_ofs=0;
 
 	/* wait until FLASH is ready, just for sure */
-	while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+	while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
 
 	/* calculate page address, only lower 8 bits are used to address the latch,
 		 but the upper part of address is needed for writing to proper EFC */
@@ -103,7 +103,7 @@ int flash_page_program(uint32 *data, int page_num)
 	outr(MC_FCR+efc_ofs, ((page_num&0x3ff) << 8) | MC_KEY | MC_FCMD_WP);
 
 	/* wait until it's done */
-	while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+	while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
 
 	/* check for errors */
 	if ((inr(MC_FSR+efc_ofs)&MC_PROGE)) return FLASH_STAT_PROGE;
@@ -134,12 +134,12 @@ int flash_erase_plane(int efc_ofs)
 		if (lockbits&1) {
 
 			/* wait until FLASH is ready, just for sure */
-			while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+			while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
 
 			outr(MC_FCR+efc_ofs, ((page_num&0x3ff) << 8) | 0x5a000004);
 
 			/* wait until it's done */
-			while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+			while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
 
 			/* check for errors */
 			if ((inr(MC_FSR+efc_ofs)&MC_PROGE)) return FLASH_STAT_PROGE;
@@ -151,13 +151,13 @@ int flash_erase_plane(int efc_ofs)
 	}
 
 	/* wait until FLASH is ready, just for sure */
-	while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+	while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
 
 	/* erase all command to FCR */
 	outr(MC_FCR+efc_ofs, 0x5a000008);
 
 	/* wait until it's done */
-	while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+	while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
 
 	/* check for errors */
 	if ((inr(MC_FSR+efc_ofs)&MC_PROGE)) return FLASH_STAT_PROGE;

src/flash/str9x.c

@@ -309,7 +309,7 @@ static int str9x_erase(struct flash_bank_s *bank, int first, int last)
 				break;
 			alive_sleep(1);
 		}
-		if (timeout==1000)
+		if (timeout == 1000)
 		{
 			LOG_ERROR("erase timed out");
 			return ERROR_FAIL;
@@ -582,7 +582,7 @@ static int str9x_write(struct flash_bank_s *bank,
 				break;
 			alive_sleep(1);
 		}
-		if (timeout==1000)
+		if (timeout == 1000)
 		{
 			LOG_ERROR("write timed out");
 			return ERROR_FAIL;
@@ -631,7 +631,7 @@ static int str9x_write(struct flash_bank_s *bank,
 				break;
 			alive_sleep(1);
 		}
-		if (timeout==1000)
+		if (timeout == 1000)
 		{
 			LOG_ERROR("write timed out");
 			return ERROR_FAIL;