auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

tcl: replace the deprecated commands with "adapter ..."

Browse Source 
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
	tcl/board/at91sam9g20-ek.cfg
	tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
This commit is contained in:
Antonio Borneo
2019-08-23 15:51:00 +02:00
committed by Oleksij Rempel
parent 0d598535a3
commit 38ac08c1c2
210 changed files with 332 additions and 332 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
tcl/board/rsc-w910.cfg
View File

@@ -12,8 +12,8 @@ source [find target/nuc910.cfg]
#
reset_config trst_and_srst srst_pulls_trst
adapter_khz 1000
adapter_nsrst_delay 100
adapter speed 1000
adapter srst delay 100
jtag_ntrst_delay 100
$_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x04000000 -work-area-backup 0
@@ -28,7 +28,7 @@ nand device $_NANDNAME nuc910 $_TARGETNAME
# Target events
#
$_TARGETNAME configure -event reset-start {adapter_khz 1000}
$_TARGETNAME configure -event reset-start {adapter speed 1000}
$_TARGETNAME configure -event reset-init {
# switch on PLL for 200MHz operation
@@ -47,7 +47,7 @@ $_TARGETNAME configure -event reset-init {
arm7_9 dcc_downloads enable
arm7_9 fast_memory_access enable
adapter_khz 15000
adapter speed 15000
# map nor flash to 0x20000000
# map sdram to 0x00000000