auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

tcl: replace the deprecated commands with "adapter ..."

Browse Source 
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
	tcl/board/at91sam9g20-ek.cfg
	tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
This commit is contained in:
Antonio Borneo
2019-08-23 15:51:00 +02:00
committed by Oleksij Rempel
parent 0d598535a3
commit 38ac08c1c2
210 changed files with 332 additions and 332 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
tcl/target/stm32l0.cfg
View File

@@ -24,9 +24,9 @@ if { [info exists WORKAREASIZE] } {
# JTAG speed should be <= F_CPU/6.
# F_CPU after reset is ~2MHz, so use F_JTAG max = 333kHz
adapter_khz 300
adapter speed 300
adapter_nsrst_delay 100
adapter srst delay 100
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
@@ -70,7 +70,7 @@ proc stm32l0_enable_HSI16 {} {
while { ([ mrw 0x4002100c ] & 0x0c) != 0x04 } { }
# Increase speed
adapter_khz 2500
adapter speed 2500
}
$_TARGETNAME configure -event reset-init {
@@ -78,7 +78,7 @@ $_TARGETNAME configure -event reset-init {
}
$_TARGETNAME configure -event reset-start {
adapter_khz 300
adapter speed 300
}
$_TARGETNAME configure -event examine-end {