auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

tcl: replace the deprecated commands with "adapter ..."

Browse Source 
Avoid annoying "deprecated" messages while running the scripts
distributed with OpenOCD code.
Change automatically created with commands
	sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f)
	sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f)

Minor indentation issue fixed manually in
	tcl/board/at91sam9g20-ek.cfg
	tcl/target/at91sam9260_ext_RAM_ext_flash.cfg

Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5284
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
This commit is contained in:
Antonio Borneo
2019-08-23 15:51:00 +02:00
committed by Oleksij Rempel
parent 0d598535a3
commit 38ac08c1c2
210 changed files with 332 additions and 332 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
tcl/tools/firmware-recovery.tcl
View File

@@ -29,7 +29,7 @@ dump_part <name> <filename> save partition's contents to a file
erase_part <name> erase the given partition
flash_part <name> <filename> erase, flash and verify the given partition
ram_boot <filename> load binary file to RAM and run it
adapter_khz <freq> set JTAG clock frequency in kHz
adapter speed <freq> set JTAG clock frequency in kHz
For example, to clear nvram and reflash CFE on an RT-N16 using TUMPA, run:
openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
@@ -39,7 +39,7 @@ openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
}
# set default, can be overriden later
adapter_khz 1000
adapter speed 1000
proc get_partition { name } {
global partition_list