auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add an interface file for DLP Design DLP-USB1232H.

Browse Source 
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.

The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter

Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Uwe Hermann
2011-10-14 00:21:06 +02:00
committed by Spencer Oliver
parent d4599b8b3f
commit 498662e2e5
3 changed files with 17 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
tcl/interface/dlp-usb1232h.cfg Normal file
View File

@@ -0,0 +1,14 @@
#
# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module
#
# http://www.dlpdesign.com/usb/usb1232h.shtml
#
# Schematics for OpenOCD usage:
# http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter
#
interface ft2232
ft2232_device_desc "Dual RS232-HS"
ft2232_layout usbjtag
ft2232_vid_pid 0x0403 0x6010