moved out stuff that wasn't already moved from openocd.pdf to the target library.

git-svn-id: svn://svn.berlios.de/openocd/trunk@576 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/Makefile.am

@@ -24,4 +24,8 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script
 	target/sam7x256.cfg target/str710.cfg target/str912.cfg target/nslu2.cfg target/pxa255_sst.cfg \
 	target/pxa255.cfg  target/zy1000.cfg event/zy1000_reset.script event/at91sam9260_reset.script target/at91sam9260.cfg \
 	target/wi-9c.cfg event/wi-9c_reset.script event/pxa255_reset.script target/stm32.cfg  target/xba_revA3.cfg event/xba_revA3.script \
-	ecos/at91eb40a.elf target/lm3s6965.cfg interface/parport.cfg
+	ecos/at91eb40a.elf target/lm3s6965.cfg interface/parport.cfg \
+	event/omap5912_reset.script interface/amontec-tiny.cfg interface/str9-comstick.cfg \
+	target/epc9301.cfg target/ipx42x.cfg target/lpc2129.cfg target/netx500.cfg \
+	target/omap5912.cfg target/pxa270.cfg target/str750.cfg target/str9comstick.cfg
+  

src/target/event/omap5912_reset.script

@@ -0,0 +1,21 @@
+#
+# halt target
+#
+poll
+sleep 1
+halt
+wait_halt
+#
+# disable wdt
+#
+mww 0xfffec808 0x000000f5
+mww 0xfffec808 0x000000a0
+
+mww 0xfffeb048 0x0000aaaa
+sleep 500
+mww 0xfffeb048 0x00005555
+sleep 500
+#
+# detect flash
+#
+flash probe 0

src/target/interface/amontec-tiny.cfg

@@ -0,0 +1,8 @@
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 0
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200

src/target/interface/str9-comstick.cfg

@@ -0,0 +1,3 @@
+interface ft2232
+ft2232_device_desc "STR9-comStick A"
+ft2232_layout comstick

src/target/target/epc9301.cfg

@@ -0,0 +1,12 @@
+# Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
+jtag_device 4 0x1 0xf 0xe
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+#target configuration
+daemon_startup attach
+#target <type> <endianess> <reset mode>
+target arm920t little reset_halt 0
+working_area 0 0x80014000 0x1000 backup
+#flash configuration
+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
+flash bank cfi 0x60000000 0x1000000 2 2 0

src/target/target/ipx42x.cfg

@@ -0,0 +1,13 @@
+#xscale ixp42x CPU
+
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target xscale big run_and_halt 0 IXP42x
+run_and_halt_time 0 30

src/target/target/lpc2129.cfg

@@ -0,0 +1,15 @@
+#LPC-2129 CPU
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
+run_and_halt_time 0 30
+working_area 0 0x40000000 0x4000 nobackup
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum

src/target/target/netx500.cfg

@@ -0,0 +1,13 @@
+#Hilscher netX 500 CPU
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+#target configuration
+daemon_startup reset
+#target <type> <endianness> <startup mode> <chainpos> <variant>
+target arm926ejs little run_and_halt 0 arm926ejs
+run_and_halt_time 0 500

src/target/target/omap5912.cfg

@@ -0,0 +1,25 @@
+#TI OMAP5912 dual core processor - http://www.ti.com 
+#on a OMAP5912 OSK board http://www.spectrumdigital.com.
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 38 0x0 0x0 0x0
+jtag_device 4  0x1 0x0 0xe
+jtag_device 8  0x0 0x0 0x0
+
+#target configuration
+daemon_startup reset
+
+#target <type> <endianness> <reset mode> <chainpos> <variant>
+target arm926ejs little run_and_init 1 arm926ejs
+target_script 0 reset event/omap5912_reset.script
+run_and_halt_time 0 30
+
+# omap5912 lcd frame buffer as working area
+working_area 0 0x20000000 0x3e800 nobackup
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank cfi 0x00000000 0x1000000 2 2 0

src/target/target/pxa270.cfg

@@ -0,0 +1,22 @@
+#Marvell/Intel PXA270 Script
+# set jtag_nsrst_delay to the delay introduced by your reset circuit
+# the rest of the needed delays are built into the openocd program
+jtag_nsrst_delay 260
+# set the jtag_ntrst_delay to the delay introduced by a reset circuit
+# the rest of the needed delays are built into the openocd program
+jtag_ntrst_delay 0
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst separate
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+#target configuration
+daemon_startup reset
+target xscale little reset_halt 0 pxa27x
+# maps to PXA internal RAM. If you are using a PXA255
+# you must initialize SDRAM or leave this option off
+working_area 0 0x5c000000 0x10000 nobackup
+run_and_halt_time 0 30
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+# works for P30 flash
+flash bank cfi 0x00000000 0x1000000 2 4 0

src/target/target/str750.cfg

@@ -0,0 +1,19 @@
+#STR750 CPU
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+#reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst srst_pulls_trst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+#jtag nTRST and nSRST delay
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi
+run_and_halt_time 0 30
+working_area 0 0x40000000 0x4000 nobackup
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank str7x 0x20000000 0x000040000 0 0 0 STR75x

src/target/target/str9comstick.cfg

@@ -0,0 +1,19 @@
+#Hitex STR9 Comstick
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+#use combined on interfaces or targets that can’t set TRST/SRST separately
+reset_config trst_and_srst
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 8 0x1 0x1 0xfe
+jtag_device 4 0x1 0xf 0xe
+jtag_device 5 0x1 0x1 0x1e
+#target configuration
+daemon_startup reset
+#target <type> <startup mode>
+#target arm966e <endianness> <reset mode> <chainpos> <variant>
+target arm966e little reset_halt 1 arm966e
+run_and_halt_time 0 30
+working_area 0 0x50000000 16384 nobackup
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank str9x 0x00000000 0x00080000 0 0 0