auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Support hla_serial command for ST-LINK adapters.

Browse Source 
The hla_serial command allows for a programming device serial number to be
specified in addition to USB VID/PID.  This allows for multiple ST-LINK/V2
programmers to be attached to a single machine and operated using openocd.

Change-Id: I350654bf676eb26ba3a90450acfa55d2a5d2d791
Signed-off-by: Austin Phillips <austin_phillips@hotmail.com>
Reviewed-on: http://openocd.zylin.com/2198
Tested-by: jenkins
Reviewed-by: Martin Glunz <mg@wunderkis.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Austin Phillips
2014-09-18 14:39:41 +10:00
committed by Spencer Oliver
parent 3a4ec66b24
commit 7568a91c8e
13 changed files with 139 additions and 32 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
doc/openocd.texi
View File

@@ -3079,13 +3079,17 @@ This type of adapter does not expose some of the lower level api's
that OpenOCD would normally use to access the target.
Currently supported adapters include the ST STLINK and TI ICDI.
STLINK firmware version >= V2.J21.S4 recommended due to issues with earlier
versions of firmware where serial number is reset after first use. Suggest
using ST firmware update utility to upgrade STLINK firmware even if current
version reported is V2.J21.S4.
@deffn {Config Command} {hla_device_desc} description
Currently Not Supported.
@end deffn
@deffn {Config Command} {hla_serial} serial
Currently Not Supported.
Specifies the serial number of the adapter.
@end deffn
@deffn {Config Command} {hla_layout} (@option{stlink}|@option{icdi})