auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

tcl: Adapt config files to new ftdi command syntax

Browse Source 
The patch was created automatically using the following
script:

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
ftdi_device_desc ftdi device_desc
ftdi_serial ftdi serial
ftdi_channel ftdi channel
ftdi_layout_init ftdi layout_init
ftdi_layout_signal ftdi layout_signal
ftdi_set_signal ftdi set_signal
ftdi_get_signal ftdi get_signal
ftdi_vid_pid ftdi vid_pid
ftdi_tdo_sample_edge ftdi tdo_sample_edge
EOF
) | while read a b; do
sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" )
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6333
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Marc Schink
2021-06-23 20:54:49 +02:00
committed by Antonio Borneo
parent 1d4b252bb1
commit 7c38f24529
96 changed files with 494 additions and 494 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
tcl/interface/ftdi/ft232h-module-swd.cfg
View File

@@ -8,27 +8,27 @@
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6014
ftdi vid_pid 0x0403 0x6014
# data MSB..LSB direction (1:out) MSB..LSB
# 0000'0000'0011'0000 0000'0000'0011'1011
ftdi_layout_init 0x0030 0x003b
ftdi layout_init 0x0030 0x003b
# 0xfff8 0xfffb
# Those signal are only required on some platforms or may required to be
# enabled explicitly (e.g. nrf5x chips).
ftdi_layout_signal nSRST -data 0x0010 -oe 0x0010
ftdi_layout_signal nTRST -data 0x0020 -oe 0x0020
ftdi layout_signal nSRST -data 0x0010 -oe 0x0010
ftdi layout_signal nTRST -data 0x0020 -oe 0x0020
# swd enable
ftdi_layout_signal SWD_EN -data 0
ftdi layout_signal SWD_EN -data 0
# tri-state (configure as input) TDO/TIO when reading
ftdi_layout_signal SWDIO_OE -data 0
ftdi layout_signal SWDIO_OE -data 0
transport select swd
# re-configure TDO as tri-state
#ftdi_layout_signal TDO -data 0x0002 -oe 0x0002
#ftdi_layout_signal TDI -data 0x0004
#ftdi layout_signal TDO -data 0x0002 -oe 0x0002
#ftdi layout_signal TDI -data 0x0004
# Adafruit FT232H JTAG SWD
# Name Pin Name Func Func