auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

flash: nor: ath79: remove base calculation

Browse Source 
Currently it is impossible to flash ELF with correct offsets. The reason
is a bogus offset calculation extracted from base.
Since any other spi drivers do not care about base, do the same for
ath79 as well.

Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4821
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This commit is contained in:
Oleksij Rempel
2018-12-26 12:47:11 +01:00
committed by Tomas Vanek
parent 08e64a828c
commit 8f777bc1a6
6 changed files with 6 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/openocd.texi
+2 -2
View File
@@ -5347,12 +5347,12 @@ since the alternate function must be enabled on the GPIO pin
CS1/CS2 is routed to on the given SoC.
@example
flash bank $_FLASHNAME ath79 0 0 0 0 $_TARGETNAME
flash bank $_FLASHNAME ath79 0xbf000000 0 0 0 $_TARGETNAME
# When using multiple chipselects the base should be different for each,
# otherwise the write_image command is not able to distinguish the
# banks.
flash bank flash0 ath79 0x00000000 0 0 0 $_TARGETNAME cs0
flash bank flash0 ath79 0xbf000000 0 0 0 $_TARGETNAME cs0
flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1
flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2
@end example