nit: do not add \n at end of LOG_ERROR

Fixed in many other places, and submitted in response to Øyvind's invitation.
This commit is contained in:
Eric Wetzel
2011-01-05 14:24:54 -05:00
committed by Øyvind Harboe
parent 0cd84000da
commit a665ef716a
15 changed files with 63 additions and 63 deletions

View File

@@ -263,7 +263,7 @@ static int davinci_write_page(struct nand_device *nand, uint32_t page,
/* Always write both data and OOB ... we are not "raw" I/O! */
if (!data) {
LOG_ERROR("Missing NAND data; try 'nand raw_access enable'\n");
LOG_ERROR("Missing NAND data; try 'nand raw_access enable'");
return ERROR_NAND_OPERATION_FAILED;
}

View File

@@ -169,7 +169,7 @@ NAND_DEVICE_COMMAND_HANDLER(nuc910_nand_device_command)
nuc910_nand = calloc(1, sizeof(struct nuc910_nand_controller));
if (!nuc910_nand) {
LOG_ERROR("no memory for nand controller\n");
LOG_ERROR("no memory for nand controller");
return ERROR_NAND_DEVICE_INVALID;
}

View File

@@ -121,13 +121,13 @@ NAND_DEVICE_COMMAND_HANDLER(orion_nand_device_command)
uint8_t ale, cle;
if (CMD_ARGC != 3) {
LOG_ERROR("arguments must be: <target_id> <NAND_address>\n");
LOG_ERROR("arguments must be: <target_id> <NAND_address>");
return ERROR_NAND_DEVICE_INVALID;
}
hw = calloc(1, sizeof(*hw));
if (!hw) {
LOG_ERROR("no memory for nand controller\n");
LOG_ERROR("no memory for nand controller");
return ERROR_NAND_DEVICE_INVALID;
}

View File

@@ -38,7 +38,7 @@ S3C24XX_DEVICE_COMMAND()
struct s3c24xx_nand_controller *s3c24xx_info;
s3c24xx_info = malloc(sizeof(struct s3c24xx_nand_controller));
if (s3c24xx_info == NULL) {
LOG_ERROR("no memory for nand controller\n");
LOG_ERROR("no memory for nand controller");
return -ENOMEM;
}

View File

@@ -112,7 +112,7 @@ static int aduc702x_erase(struct flash_bank *bank, int first, int last)
if (aduc702x_check_flash_completion(target, 3500) != ERROR_OK)
{
LOG_ERROR("mass erase failed\n");
LOG_ERROR("mass erase failed");
aduc702x_set_write_enable(target, 0);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -132,7 +132,7 @@ static int aduc702x_erase(struct flash_bank *bank, int first, int last)
if (aduc702x_check_flash_completion(target, 50) != ERROR_OK)
{
LOG_ERROR("failed to erase sector at address 0x%08lX\n", adr);
LOG_ERROR("failed to erase sector at address 0x%08lX", adr);
aduc702x_set_write_enable(target, 0);
return ERROR_FLASH_SECTOR_NOT_ERASED;
}
@@ -330,7 +330,7 @@ static int aduc702x_write_single(struct flash_bank *bank, uint8_t *buffer, uint3
if (aduc702x_check_flash_completion(target, 1) != ERROR_OK)
{
LOG_ERROR("single write failed for address 0x%08lX\n", (unsigned long)(offset + x));
LOG_ERROR("single write failed for address 0x%08lX", (unsigned long)(offset + x));
aduc702x_set_write_enable(target, 0);
return ERROR_FLASH_OPERATION_FAILED;
}

View File

@@ -1787,7 +1787,7 @@ sam3_ReadThisReg(struct sam3_chip *pChip, uint32_t *goes_here)
r = target_read_u32(pChip->target, pReg->address, goes_here);
if (r != ERROR_OK) {
LOG_ERROR("Cannot read SAM3 register: %s @ 0x%08x, Err: %d\n",
LOG_ERROR("Cannot read SAM3 register: %s @ 0x%08x, Err: %d",
pReg->name, (unsigned)(pReg->address), r);
}
return r;
@@ -1806,7 +1806,7 @@ sam3_ReadAllRegs(struct sam3_chip *pChip)
r = sam3_ReadThisReg(pChip,
sam3_get_reg_ptr(&(pChip->cfg), pReg));
if (r != ERROR_OK) {
LOG_ERROR("Cannot read SAM3 registere: %s @ 0x%08x, Error: %d\n",
LOG_ERROR("Cannot read SAM3 registere: %s @ 0x%08x, Error: %d",
pReg->name, ((unsigned)(pReg->address)), r);
return r;
}
@@ -1869,7 +1869,7 @@ sam3_erase_check(struct flash_bank *bank)
return ERROR_TARGET_NOT_HALTED;
}
if (0 == bank->num_sectors) {
LOG_ERROR("Target: not supported/not probed\n");
LOG_ERROR("Target: not supported/not probed");
return ERROR_FAIL;
}
@@ -2066,7 +2066,7 @@ _sam3_probe(struct flash_bank *bank, int noise)
pPrivate = get_sam3_bank_private(bank);
if (!pPrivate) {
LOG_ERROR("Invalid/unknown bank number\n");
LOG_ERROR("Invalid/unknown bank number");
return ERROR_FAIL;
}

View File

@@ -264,7 +264,7 @@ static int eCosBoard_erase(struct ecosflash_flash_bank *info, uint32_t address,
if (flashErr != 0x0)
{
LOG_ERROR("Flash erase failed with %d (%s)\n", (int)flashErr, flash_errmsg(flashErr));
LOG_ERROR("Flash erase failed with %d (%s)", (int)flashErr, flash_errmsg(flashErr));
return ERROR_FAIL;
}
@@ -322,7 +322,7 @@ static int eCosBoard_flash(struct ecosflash_flash_bank *info, void *data, uint32
if (flashErr != 0x0)
{
LOG_ERROR("Flash prog failed with %d (%s)\n", (int)flashErr, flash_errmsg(flashErr));
LOG_ERROR("Flash prog failed with %d (%s)", (int)flashErr, flash_errmsg(flashErr));
return ERROR_FAIL;
}
}