Move TCL script files -- Step 2 of 2:

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60

tcl/target/imx27.cfg

@@ -0,0 +1,42 @@
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME imx27
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+
+# Note above there are 2 taps 
+
+# The bs tap
+if { [info exists BSTAPID ] } {
+   set _BSTAPID $BSTAPID
+} else {
+   set _BSTAPID 0x1b900f0f
+}
+jtag newtap $_CHIPNAME bs  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_BSTAPID
+
+# The CPU tap
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x07926121
+}
+jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+# Create the GDB Target.
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 -work-area-size  0x8000 -work-area-backup 1
+# Internal to the chip, there is 45K of SRAM
+#
+
+arm7_9 dcc_downloads enable