Move TCL script files -- Step 2 of 2:

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60

tcl/target/omap3530.cfg

@@ -0,0 +1,57 @@
+#File omap3530.cfg - as found on the BEAGLEBOARD
+#  Assumption is it is generic for all OMAP3530 
+
+#TI OMAP3 processor - http://www.ti.com 
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME omap3
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+  # this defaults to a little endianness
+  set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+  set _CPUTAPID 0x0B6D602F
+}
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID -disable
+jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0xf -expected-id 0x0b7ae02f
+
+target create omap3.cpu cortex_m3 -endian little -chain-position omap3.cpu
+
+jtag configure $_CHIPNAME.cpu -event tap-enable {
+	puts "Enabling Cortex-A8 @ OMAP3"
+	irscan omap3.jrc 7 -endstate IRPAUSE
+	drscan omap3.jrc 8 0x89 -endstate DRPAUSE
+	irscan omap3.jrc 2 -endstate IRPAUSE
+	drscan omap3.jrc 32 0xa3002108  -endstate RUN/IDLE
+	irscan omap3.jrc 0x3F -endstate RUN/IDLE
+	runtest 10
+	puts "Cortex-A8 @ OMAP3 enabled"
+}
+
+proc omap3_dbginit { } {
+     version
+     jtag tapenable omap3.cpu
+     targets
+     # sleep 1000
+     # dap apsel 1
+     # sleep 1000
+     # dap apsel 1
+     # dap info 1
+     omap3.cpu mww 0x54011FB0 0xC5ACCE55 4
+     omap3.cpu mdw 0x54011314
+     omap3.cpu mdw 0x54011314
+     # omap3.cpu mdw 0x54011080
+     omap3.cpu mww 0x5401d030 0x00002000 4
+}