Move TCL script files -- Step 2 of 2:

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60

tcl/target/pxa255.cfg

@@ -0,0 +1,104 @@
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME pxa255
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
+
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa255
+$_TARGETNAME configure -event reset-init {
+	xscale cp15   15      0x00002001  #Enable CP0 and CP13 access
+	#
+	# setup GPIO
+	#
+	mww    0x40E00018  0x00008000  #CPSR0
+	sleep   20
+	mww    0x40E0001C  0x00000002  #GPSR1
+	sleep   20
+	mww    0x40E00020  0x00000008  #GPSR2
+	sleep   20
+	mww    0x40E0000C  0x00008000  #GPDR0
+	sleep   20
+	mww    0x40E00054  0x80000000  #GAFR0_L
+	sleep   20
+	mww    0x40E00058  0x00188010  #GAFR0_H
+	sleep   20
+	mww    0x40E0005C  0x60908018  #GAFR1_L
+	sleep   20
+	mww    0x40E0000C  0x0280E000  #GPDR0
+	sleep   20
+	mww    0x40E00010  0x821C88B2  #GPDR1
+	sleep   20
+	mww    0x40E00014  0x000F03DB  #GPDR2
+	sleep   20
+	mww    0x40E00000  0x000F03DB  #GPLR0
+	sleep   20
+
+
+	mww    0x40F00004  0x00000020  #PSSR
+	sleep   20
+
+	#
+	# setup memory controller
+	#
+	mww    0x48000008  0x01111998  #MSC0
+	sleep   20
+	mww    0x48000010  0x00047ff0  #MSC2
+	sleep   20
+	mww    0x48000014  0x00000000  #MECR
+	sleep   20
+	mww    0x48000028  0x00010504  #MCMEM0
+	sleep   20
+	mww    0x4800002C  0x00010504  #MCMEM1
+	sleep   20
+	mww    0x48000030  0x00010504  #MCATT0
+	sleep   20
+	mww    0x48000034  0x00010504  #MCATT1
+	sleep   20
+	mww    0x48000038  0x00004715  #MCIO0
+	sleep   20
+	mww    0x4800003C  0x00004715  #MCIO1
+	sleep   20
+	#
+	mww    0x48000004  0x03CA4018  #MDREF
+	sleep   20
+	mww    0x48000004  0x004B4018  #MDREF
+	sleep   20
+	mww    0x48000004  0x000B4018  #MDREF
+	sleep   20
+	mww    0x48000004  0x000BC018  #MDREF
+	sleep   20
+	mww    0x48000000  0x00001AC8  #MDCNFG
+	sleep   20
+
+	sleep   20
+
+	mww    0x48000000  0x00001AC9  #MDCNFG
+	sleep   20
+	mww    0x48000040  0x00000000  #MDMRS
+	sleep   20
+}
+
+reset_config trst_and_srst
+
+
+
+#xscale debug_handler 0  0xFFFF0800      # debug handler base address
+