Move TCL script files -- Step 2 of 2:

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60

tcl/target/str730.cfg

@@ -0,0 +1,46 @@
+#STR730 CPU
+
+jtag_khz 3000
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME str730
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {	
+   set  _CPUTAPID $CPUTAPID    
+} else {	 
+   set  _CPUTAPID 0x3f0f0f0f
+}
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+#reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
+
+#jtag nTRST and nSRST delay
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+$_TARGETNAME configure -event reset-start { jtag_khz 10 }
+$_TARGETNAME configure -event reset-init { jtag_khz 3000 }
+$_TARGETNAME configure -event gdb-flash-erase-start {
+	flash protect 0 0 7 off
+}
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x
+