doc: usb_adapters: add lsusb dump of few adapters

Real dumps from adapters I have access to.
Serial numbers have been manually edited but are still consistent.

Change-Id: Iee2d16e09615746e29588f91fdfb77eb9fad4daa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7297
Tested-by: jenkins

doc/usb_adapters/stlink/0483_3748_stlinkv2.txt

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
+
+# ST-Link/V2 standalone or ST-Link/V2 in firmware update mode
+
+Bus 001 Device 006: ID 0483:3748 STMicroelectronics ST-LINK/V2
+Device Descriptor:
+  bLength                18
+  bDescriptorType         1
+  bcdUSB               2.00
+  bDeviceClass            0
+  bDeviceSubClass         0
+  bDeviceProtocol         0
+  bMaxPacketSize0        64
+  idVendor           0x0483 STMicroelectronics
+  idProduct          0x3748 ST-LINK/V2
+  bcdDevice            1.00
+  iManufacturer           1 STMicroelectronics
+  iProduct                2 STM32 STLink
+  iSerial                 3 0668FF323637414257071827
+  bNumConfigurations      1
+  Configuration Descriptor:
+    bLength                 9
+    bDescriptorType         2
+    wTotalLength       0x0027
+    bNumInterfaces          1
+    bConfigurationValue     1
+    iConfiguration          0
+    bmAttributes         0x80
+      (Bus Powered)
+    MaxPower              100mA
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        0
+      bAlternateSetting       0
+      bNumEndpoints           3
+      bInterfaceClass       255 Vendor Specific Class
+      bInterfaceSubClass    255 Vendor Specific Subclass
+      bInterfaceProtocol    255 Vendor Specific Protocol
+      iInterface              4 ST Link
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x81  EP 1 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x02  EP 2 OUT
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x83  EP 3 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
+Device Status:     0x0000
+  (Bus Powered)