Previously it might read an address multiple times if an abstract
command took longer to execute than expected.
The new implementations reads from the target how far it has gotten
along reading memory, and resumes from there if cmderr=busy.
This ended up being a bigger change than I envisioned, but in the end it
deleted more lines than it added, so I'm happy. :-)
The downloaded program now post-increments, and there's no longer an
attempt to read the current address from the target. This made it easier
to fix the problem where at the start of the loop the current address
was already read (in regular entry) or has not yet been read (when the
first round through the loop encountered busy more than once, or busy
was encountered at least once later on).
The interesting new code concerns ignore_prev_addr and
this_is_last_read.
Additionally, I tweaked some debug output, and optimized
riscv_batch_run() when the batch is empty.
IDs for STM32F722, F723, F413 and F423 added, handling of PCROP
for F722/723 and additional nWPRT bits for F413/423 implemented.
The additional protection bit positions for F413/423 conflict
with other options bits for the F7xx variants, additionally the
last two sectors share a common bit.
Protection for F413 and F767/777 now use protection blocks
rather sectors for dealing with protections bits.
Checking for halted state in 'lock' and 'unlock' removed: When
PCROP is activated in F723, halted state is not detected properly,
but lock/unlock sequence is required to disable PCROP.
Tested with STM32F723E-Disco, STM32F413ZH-Nucleo.
Change-Id: Ie6ddab47a9ae8461087d369b4f289b7f9d1e031c
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-on: http://openocd.zylin.com/4045
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Change ftdi SWD driver and CMSIS-DAP to use it instead of LOG_DEBUG().
Change-Id: I17ba3de2086c7159209db61fba3faf067dfc5023
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3805
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Usually incrementing to get the next port is a good idea, but when set
to 0 the idea is to find an arbitrary unallocated port. 1 is almost
certainly not helpful.
This is essential when a test environment asks OpenOCD to listen on port
0, so that the environment can easily discover which port is actually
being used.
If a MCU has FlexNVM partitioned as EEPROM backup only
(no data flash), kinetis_probe_chip() detects zero fcfg2_maxaddr1
and adjusts flash banks count to 1, what is obviously wrong.
The change limits the test to devices without FlexNVM.
Computation of program flash/FlexNVM blocks is now more robust.
Missing case 0x07 is added to switch (fcfg1_depart)
Change-Id: I0bd6030a0fe1ab62aeb0223bbdf2aee1505bf6a0
Reported-by: simon.haines@scalardata.com
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4180
Tested-by: jenkins
Reviewed-by: Simon Haines <simon.haines@scalardata.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
The actual implementation of triggers didn't change between those two
versions, so there's no need to duplicate the code.
In the process, I also fixed a minor multicore bug where tselect didn't
always get written on all harts.
This is the only way the spec guarantees that GPRs are accessible, and
depending on the implementation this might be the only way that CSRs are
accessible.
Also changed the debug code that parses out DMI fields to be simpler to
maintain (albeit a little slower).
riscv013_execute_debug_buffer() now automatically clears cmderr if the
command fails. That feels like the right behavior. (It does return the
error to its caller.)
When first connecting to a target, have the debugger disable any
hardware triggers that are set by a previously connected debugger.
The 0.11 code already did this, but 0.13 did not.
To achieve this I decided to share the code to enumerate triggers
between 0.11 and 0.13, which required me to implement get_register() and
set_register() for 0.11, which made the whole change a lot larger than
you might have guessed.
Hopefully this sets us up to in the future share the code to set/remove
triggers as well.
They were implemented, and people want to keep using them.
Also make OpenOCD tolerate cores that have $misa at 0xf10 instead of the
current address of 0x301.
Actually return an error when we fail to read a CSR.
Tweak cache_set32() debug output.
Tim Newsome