from pre/post_reset event scripts. Adding the second parameter was
a mistake seen in retrospect. this gives precise control in post_reset
for *when* the post reset speed is set. The pre_reset event was
added *after* the second parameter to jtag_khz/speed
- the target implementations no longer gets involved in the reset mode
scheme. Either they reset a target into a halted mode or not.
target_process_reset()
detects if the reset halt failed or not.
- tcl target event names are now target_N_name. Mainly internal
at this early stage, but best to get the naming right now.
- added hardcoded reset modes from gdb_server.c. I don't know precisely what
these defaults should be or if it should be made configurable. Perhaps some
hardcoded defaults will do for now and it can be made configurable later.
- bugfix in cortex_m3.c for reset_run_and_xxx?
- issue syntax error upon obsolete argument in target command instead of
printing message that will surely drown in the log
git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
This address the >32 bit problem with drscan
also added a check for bypass in the execute since this will manifest itself
as a memory corruption when this check helps to debug the problem alot easier
git-svn-id: svn://svn.berlios.de/openocd/trunk@794 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- drscan is now a low level tcl command:
execute DR scan <device> <num_bits> <value> <num_bits1> <value2>
- removed obsolete partial command text support
git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- TAP reset without TRST shall be called TLR (stands for test-logic-reset, named after the TAP state it ends is) rather than tms (test-mode-select)
- some comments changed to /* C coding style */
git-svn-id: svn://svn.berlios.de/openocd/trunk@717 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Work in progress to allow launching GDB/telnet server *before* jtag
chain enum, validate & examine
git-svn-id: svn://svn.berlios.de/openocd/trunk@569 b42882b7-edfa-0310-969c-e2dbd0fdcd60
to daemon_startup(still supported).
- print warning if srst and trst change state at the same time when srst_and_trst
is seperate
- reset now performs a trst, examines and validates the jtag chain before targets
assert reset
- if startup fails to examine and validate the jtag chain, try a reset before
trying again
git-svn-id: svn://svn.berlios.de/openocd/trunk@552 b42882b7-edfa-0310-969c-e2dbd0fdcd60
is post reset = reset speed.
- removed infinite loop's and exit()'s upon poor arm7/9 communication
- cleaned up error messages a bit. Push ERROR() up into fn's that
fail and can say something meaningful about what failed.
git-svn-id: svn://svn.berlios.de/openocd/trunk@511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
that all the jtag_add_xxx() are indeed intended to do the same thing.
git-svn-id: svn://svn.berlios.de/openocd/trunk@504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- hopefully clarified the difference between TRST and TMS reset.
- added DEBUG() statements w.r.t. state changes
- TRST released and moving out of TAP_TLR are completely
different events. Only TRST released has a DEBUG() statement
git-svn-id: svn://svn.berlios.de/openocd/trunk@496 b42882b7-edfa-0310-969c-e2dbd0fdcd60
fail for two of it's return codes. A little bit weird, but compatible with
existing codebase.
- tightend up error handling. Since the jtag_xxx() is a queue that is either
executed as things are added(hw queue) or a software queue, then
errors can only be caught during jtag_execute_queue(). No error
code is therefore returned from the queuing fn's.
git-svn-id: svn://svn.berlios.de/openocd/trunk@492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
are up and running. The examination and validation is actually
"optional" from the point of view of GDB + telnet servers.
Multiple targets should work fine with this.
- jtag_speed is dropped(divisor is increased), if jtag examination and
validation fails.
- the chain is validated 10x to catch the worst jtag_speed offences
- added LOG_SILENT that can be used to shut up log. Feeble
ersatz for try+catch.
- GDB register packets are now always replied in order to make sure
that GDB connect works. If the target is not halted, then these
packets contain dummy values.
git-svn-id: svn://svn.berlios.de/openocd/trunk@483 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added a check to jtag_add_pathmove() for legal path transitions
- tweaked jtag.h docs a little bit
- made some jtag bypass tests _DEBUG_JTAG_IO_
git-svn-id: svn://svn.berlios.de/openocd/trunk@448 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Passes 94kBytes/s regression test.
Works with str912, which relies on bypass
git-svn-id: svn://svn.berlios.de/openocd/trunk@447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
