- Remove once-used XXX_FTD2XX symbols; replace with XXX_DRIVER symbols.
- Enabled when either libftdi or FTD2xx driver should be built.
- Eliminates redundant DRIVERSFILE assignment in JTAG automake input.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Consolidate all individual driver variables into DRIVERFILES.
- Eliminates all empty 'else' conditional clauses.
- Move minidriver files to top of file.
- Use MINIDRIVER conditional to build only driver(s) that will be linked.
- Eliminate superfluous whitespace.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- src/jtag/core.c: contains the low-level JTAG TAP and scanning routines.
- src/jtag/tcl.c: contains high-level JTAG TCL commands that use the core.
- Remove static keywords from routines in core.c, extern from tcl.c:
- jtag, jtag_interface global variables
- jtag_{examine,validate}_chain and jtag_tap_{init,free} functions
- Added myself to the copyright header in both of these files.
- Used 'svn cp' to add files, so versioning was preserved for both.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2149 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Try to disambiguates minidriver options from "standard" driver options.
- Make minidummy symbols more explict about being a minidriver.
- Move minidummy.c into minidummy directory to put it with its header.
In configure.in:
- Improve configuration option to allow new minidriver implementations:
- Change option from --enable-minidummy to --enable-minidriver-dummy.
- Move it to the end of the list of options.
- Provides a clear pattern for future minidrivers.
- Update handling of HAVE_JTAG_MINIDRIVER_H:
- Check for external jtag_minidriver.h only with --enable-ecosboard.
- Otherwise, define it when --enable-minidriver-dummy is provided.
- Add check to ensure only one minidriver is enabled.
- When a minidriver is enabled, warn user that standard drivers are not built.
- Use proper AC_DEFINE semantics with MINIDRIVER_DUMMY.
In src/jtag/Makefile.am:
- Restructure handling of minidummy source files.
- Include minidummy driver header in the distribution.
In src/jtag/jtag.c:
- Restructure preprocessor logic to include:
- only one minidriver, or
- all configured standard drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2102 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Cloned the src/jtag/jtag.c file to src/jtag/interface.c.
- For each for of those files, deleted the contents of the other.
- Add new source file to automake input.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2012 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Move the jtag_interface structure definition.
- Move the Cable API declarations.
- Add new header file to automake input.
The next patch will move the implementation to interface.c.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2008 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Wraps all minidriver API functions using API front-ends:
- Outlines jtag_add_dr_out() and jtag_alloc_in_value32().
- Adds interface_ prefix to existing jtag_alloc_invalue_32 routines.
- Re-inline these interface definitions in new header file.
- Re-inline parts of the (mini)driver implementations in minidriver.h.
- Replace INCLUDE_JTAG_MINIDRIVER_H with #include directives.
The next patch will finish removing '#ifdef HAVE_JTAG_MINIDRIVER_H'
from jtag.h.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2006 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- use continuations to break long lines of variable assignments
- makes these variables more patch-friendly and conform to style guide
git-svn-id: svn://svn.berlios.de/openocd/trunk@1970 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Add libtoolize step too bootstrap script; creates ltmain.sh script.
- Add AC_PROG_LIBTOOL to configure.in to add libtool support to build.
- Change Makefile.am library rules from static (_a) to libtool (_la).
- Install libopenocd.{la,so,a} in $(libdir); update openocd link rules.
- Extend MAINTAINERCLEANFILES in top-level Makefile.am to remove ltmain.sh.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
already required autoconf 2.59 (circa 2006), so there is no reason to
support versions of automake older than 1.6 (circa 2002).
The first part of this patch upgrades the configure.in script:
1. Use current calling conventions for the AC_INIT and
AM_INIT_AUTOMAKE macros, bringing their usage up-to-date with
the version of autoconf already specified by AC_PREREQ.
2. Add AC_CONFIG_SRCDIR macro, required by new version of AC_INIT.
3. Automatically enable all of automake's warnings except Makefile
portability (which OpenOCD violates by using GNU make's $(wildcard)).
[[ While automake has its own -Werror option, I did not enabled it
due to existing warnings. ]]
4. Add the missing AM_PROG_C_O check, required by the build rules for
openocd.o in src/Makefile.am.
5. Adjust version number to show progress toward the next release.
6. Include a bug reporting e-mail address to direct users to this list.
This patch makes the following adjustments to the Makefile.am files:
1. Update AUTOMAKE_OPTIONS to require automake version 1.6
2. Rewrite all deprecated INCLUDES assignments as AM_CPPFLAGS
3. Clean-up all AM_CPPFLAGS declarations to be patch-friendly.
4. Remove vestigial references to $(all_includes)
5. Remove erroneous references to @CPPFLAGS@ (only use AM_CPPFLAGS)
6. Remove unused -I and -D directives in helper/, flash/, target/
git-svn-id: svn://svn.berlios.de/openocd/trunk@1591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- drscan is now a low level tcl command:
execute DR scan <device> <num_bits> <value> <num_bits1> <value2>
- removed obsolete partial command text support
git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
are up and running. The examination and validation is actually
"optional" from the point of view of GDB + telnet servers.
Multiple targets should work fine with this.
- jtag_speed is dropped(divisor is increased), if jtag examination and
validation fails.
- the chain is validated 10x to catch the worst jtag_speed offences
- added LOG_SILENT that can be used to shut up log. Feeble
ersatz for try+catch.
- GDB register packets are now always replied in order to make sure
that GDB connect works. If the target is not halted, then these
packets contain dummy values.
git-svn-id: svn://svn.berlios.de/openocd/trunk@483 b42882b7-edfa-0310-969c-e2dbd0fdcd60
--enable-presto_ftd2xx and --enable-presto_libftdi
- completed trace point support for use with ARM7/9 DCC
- completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities)
- fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy)
- fixed bug in image_add_section (thanks to Pavel Chromy)
- at91sam7 sector erase reworked (thanks to Pavel Chromy)
- merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets
git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added support for usbprog (thanks to Benedikt Sauter)
- make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy)
- register at_exit handler to do necessary unregistering (thanks to Pavel Chromy)
- added dummy ETM capture driver to allow ETM to be registered without a capture driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands
- added lattice ISP cable (experimental)
- properly initialize parallel port (clear tristate bit)
- fixed jtag/Makefile.am that failed with some versions of autotools
- print error number if read() in gdbserver.c failed on Windows
- fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug)
- added support for AT91SAM7SE internal flash
git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added support for loading .bit files into Xilinx Virtex-II devices
- added support for the Gateworks GW16012 JTAG dongle
- merged CFI fixes from XScale branch
- a few minor fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- added access to ARM920T vector catch register (via generic register mechanism)
- don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache
- read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands)
- memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes)
- made in_handler independent from in field (makes the handler more flexible)
- added timeout to ft2232 when using D2XX library
- fixed STR7x protection bit handling on second bank (thanks to Bernard)
- added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen)
- fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen)
git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'. The library used to access the hardware is choosen during configure with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi.
git-svn-id: svn://svn.berlios.de/openocd/trunk@83 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too)
- various fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
