The register ELR_EL3 is accessible and it's content is relevant
only when the target is in EL3.
Without this patch, an error:
Error: Opcode 0xd53e4020, DSCR.ERR=1, DSCR.EL=1
is triggered by GDB register window or through GDB command
x/p $ELR_EL3
or through OpenOCD command
reg ELR_EL3
Detect the EL and return error if the register cannot be accessed.
Change-Id: I545abb196e5c34e462c7e5d5d3ec952e588642da
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8268
Tested-by: jenkins
The command 'gdb_report_register_access_error' is used to silence
errors while reading registers and not reporting them to GDB.
Nevertheless, the error is printed by a LOG_ERROR() in armv8_dpm.
Change the message to LOG_DEBUG().
It will still cause the error to be propagated and eventually
printed by the caller (e.g. by the command 'reg').
Change-Id: Ic0db74fa28235d686ddd21a5960c52ae003e0931
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8267
Tested-by: jenkins
These functions are today always called with non-NULL parameter
regval, so the actual check is not needed.
Anyway, for any future code change, check the parameter at the
entry of the functions and return error if it is not valid.
Simplify the check to assign the result value and align the code
of the two functions.
Change-Id: Ie4d98063006d70d9e2bcfc00bc930133caf33515
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8266
Tested-by: jenkins
Use LOG_TARGET_ERROR() to print the error messages and additionally add
a reference to the related target.
Change-Id: I06722f3911ef4034fdd05dc9b0e2571b01b657a4
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8314
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
cortex_m_poll_one() detects reset testing S_RESET_ST sticky bit.
If the signal comes unexpectedly, poll must return TARGET_RESET state.
On the contrary in case of polling inside of an OpenOCD reset command,
TARGET_RESET has been has already been set and we need to get out of
it as quickly as possible.
The original code needs 2 polls: the first clears S_RESET_ST
and keeps TARGET_RESET state, the current TARGET_RUNNING or TARGET_HALTED
is reflected as late as the second poll is done.
Change the logic to keep in TARGET_RESET only when necessary.
See also [1]
Link: [1] 8284: tcl/target: ti_cc3220sf: Use halt for CC3320SF targets | https://review.openocd.org/c/openocd/+/8284
Fixes: https://sourceforge.net/p/openocd/tickets/360/
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I759461e5f89ca48a6e16e4b4101570260421dba1
Reviewed-on: https://review.openocd.org/c/openocd/+/8285
Tested-by: jenkins
Reviewed-by: Dhruva Gole <d-gole@ti.com>
In case of fail to allocate 'obj->name', the memory allocated for
'obj->out_filename' is not freed, thus leaking.
Since 'obj' is allocated with calloc(), thus zeroed, switch to use
the common error exit path for both allocations of 'obj->name' and
'obj->out_filename'.
Fixes: 2506ccb509 ("target/arm_tpiu_swo: Fix division by zero")
Change-Id: I412f66ddd7bf7d260cee495324058482b26ff0c5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8300
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
For some target, the API assert_reset() checks if the target has
been examined, with target_was_examined(), to perform conditional
operations like:
- assert adapter's srst;
- write some register to catch the reset vector;
- invalidate the register cache.
Targets created with -defer-examine gets the examine flag reset
right before entering in their assert_reset(), disrupting the
actions above.
For targets created with -defer-examine, move the reset examine
after the assert_reset().
Change-Id: If96e7876dcace8905165115292deb93a3e45cb36
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8293
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Few files include target_type.h even if it is not needed.
Drop the include.
Other files access directly to target type's name instead of using
the proper API target_type_name().
Use the API and drop the include.
Change-Id: I86c0e0bbad51db93500c0efa27b7d6f1a67a02c2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8260
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Do not free the service in 'connection_closed_handler' because it is
free'd by the server infrastructure.
Checkpatch-ignore: COMMIT_LOG_LONG_LINE
This error was detected with valgrind:
==272468== Invalid free() / delete / delete[] / realloc()
==272468== at 0x484B27F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==272468== by 0x1F34C7: remove_service (server.c:374)
==272468== by 0x2ED3D5: semihosting_tcp_close_cnx (semihosting_common.c:1819)
==272468== by 0x2ED3D5: handle_common_semihosting_redirect_command (semihosting_common.c:1926)
==272468== by 0x1FC703: exec_command (command.c:520)
==272468== by 0x1FC703: jim_command_dispatch (command.c:931)
==272468== by 0x36980F: JimInvokeCommand (in /home/marc/openocd/build/src/openocd)
==272468== by 0x1FFFFFFFFF: ???
==272468== by 0x53ED09F: ???
==272468== by 0x300000001: ???
==272468== by 0x1FFEFFF7FF: ???
==272468== by 0x3D3984: ??? (in /home/marc/openocd/build/src/openocd)
==272468== by 0x2: ???
==272468== Address 0x5fff650 is 0 bytes inside a block of size 24 free'd
==272468== at 0x484B27F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==272468== by 0x2ECA42: semihosting_service_connection_closed_handler (semihosting_common.c:1807)
==272468== by 0x1F2E39: remove_connection.isra.0 (server.c:164)
==272468== by 0x1F349E: remove_connections (server.c:350)
==272468== by 0x1F349E: remove_service (server.c:364)
==272468== by 0x2ED3D5: semihosting_tcp_close_cnx (semihosting_common.c:1819)
==272468== by 0x2ED3D5: handle_common_semihosting_redirect_command (semihosting_common.c:1926)
==272468== by 0x1FC703: exec_command (command.c:520)
==272468== by 0x1FC703: jim_command_dispatch (command.c:931)
==272468== by 0x36980F: JimInvokeCommand (in /home/marc/openocd/build/src/openocd)
==272468== by 0x1FFFFFFFFF: ???
==272468== by 0x53ED09F: ???
==272468== by 0x300000001: ???
==272468== by 0x1FFEFFF7FF: ???
==272468== by 0x3D3984: ??? (in /home/marc/openocd/build/src/openocd)
==272468== Block was alloc'd at
==272468== at 0x484DA83: calloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==272468== by 0x2ED326: handle_common_semihosting_redirect_command (semihosting_common.c:1931)
==272468== by 0x1FC703: exec_command (command.c:520)
==272468== by 0x1FC703: jim_command_dispatch (command.c:931)
==272468== by 0x36980F: JimInvokeCommand (in /home/marc/openocd/build/src/openocd)
==272468== by 0x1FFFFFFFFF: ???
==272468== by 0x53ED09F: ???
==272468== by 0x400000002: ???
==272468== by 0x1FFEFFF7FF: ???
==272468== by 0x3D3984: ??? (in /home/marc/openocd/build/src/openocd)
==272468== by 0x2: ???
==272468==
Change-Id: I3e5323f145a98d1ff9ea7d03f87ed96140f49a18
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8257
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Currently, errors in pre/post-enable events are ignored and capturing is
always started, even if necessary device configuration fails. This
behaviour is confusing to users. Also, the TPIU must be disabled before
re-configuration is possible.
Start capturing and enable TPIU only if no errors in pre/post-enable
events occurred.
Change-Id: I422033e36ca006e38aa4504d491b7947def1237a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8254
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
When external capturing is configured (default), the SWO pin frequency
is required. Enforce this to avoid a division by zero error.
While at it, ensure that the 'out_filename' variable always contains a
valid string. This saves a few checks and makes the code more clean and
readable.
Change-Id: If8c1dae9549dd10e2f21d5b896414d47edac9fc2
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8224
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
For MPU configs, determine memory access rights
by probing protection TLB. Issuing IHI without execute
permissions can trigger an exception.
No new clang static analyzer warnings.
Change-Id: Iea8eab5c2113df3f954285c3b9a79e96d41aa941
Signed-off-by: Ian Thompson <ianst@cadence.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8080
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Historically, the function cortex_a_dap_write_memap_register_u32()
was used to discriminate the register write in APB-AP CPU debug
against the complex memory access in AHB-AP memory bus.
It has no sense to keep the function and its comment.
Plus, by forcing atomic write it impacts the debug performance.
Drop it!
A further rework to enqueue sequence of atomic writes is needed.
Change-Id: I2f5e9015f0e27fa5a6d8337a1ae25e753e2e1d26
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8231
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: jenkins
The command 'cache auto' was introduced with commit cd440bd32a
("add armv7a_cache handlers") in 2015 to allow disabling the cache
handling done automatically by OpenOCD.
This was probably a way to test the cache handling when there were
still the two independent accesses for APB-AP CPU debug and for
AHB-AP memory bus.
The handling of cache for cortex_a is robust and there is no more
reason to disable it.
The command 'cache auto' is not used in any upstream script.
On target aarch64 this command has never been introduced as the
cache is always handled automatically by OpenOCD.
Drop the command 'cache auto' and add it in the deprecated list.
Drop the flag 'auto_cache_enabled' by considering it as true.
Rename the function 'armv7a_cache_auto_flush_all_data()' as
'armv7a_cache_flush_all_data()' and, while there, fix the error
propagation in SMP case.
Change-Id: I0399f1081b08c4929e0795b76f4a686630f41d56
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8230
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
The initial OpenOCD code for Cortex-A (ARMv7a) [1] was merged in
2009 but, due to lack of public documentation for ARMv7a, it was
almost a simple copy/paste from the existing code for Cortex-M
(ARMv7m).
On Cortex-M the same AP provides access to both CPU debug and CPU
memory. This feature is not present on ARMv7a.
To still keep some communality with ARMv7m code, the change [2]
splits the CPU debug access from the CPU memory access by using
two independent AP; this is copied from the system architecture of
TI OMAP3530 which provides to DAP a direct AHB-AP memory bus on
AP#0, separated from AP#1 for the APB-AP CPU debug.
But the direct memory access through the system bus breaks the
coherency between memory and CPU caches, so change [3] added some
cache invalidation to avoid issues.
The code to allow ARMv7a CPU to really read/write in CPU memory
was added by change [4] in 2011. Such still not optimized
implementation was very slow, so it did not replace the access
through the system bus. A selection through DAP's 'apsel" command
was used to select between the two modes.
Only in 2015, with change [5], the speed of CPU read/write was
improved using the DCC_FAST_MODE. But the direct access to the
memory through the system bus remained.
Finally, with change [6] in 2018 the system bus access was dropped
for good, as the new virtual target "mem_ap" could implement such
access in a more clean way.
Only memory access through CPU remained for ARMv7a.
Nevertheless, a useless cache invalidation remained in the code,
decreasing the speed of the write access.
Drop the useless cache invalidate on CPU memory write and the
associated comment, not anymore valid.
Drop the now unused function armv7a_cache_auto_flush_on_write().
This provides a speedup of between 4 and 8, depending on adapter
and JTAG/SWD speed.
Link: [1] 7a93100c2d ("Add minimalist Cortex A8 file")
Link: [2] 1d0b276c9f ("The rest of the Cortex-A8 support from Magnus: ...")
Link: [3] d4e4d65d28 ("Cache invalidation when writing to memory")
Link: [4] 05ab8bdb81 ("cortex_a9: implement read/write memory through APB-AP")
Link: [5] 0228f8e827 ("Cortex A: fix extra memory read and non-word sizes")
Link: [6] fac9be64d9 ("target/cortex_a: remove buggy memory AP accesses")
Change-Id: Ifa3c7ddf2698b2c87037fb48f783844034a7140e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8229
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
The gdb subsystem is initialized after the first target examine,
so the field struct target::gdb_service is NULL during examine.
A command "smp off" in the examine event handler causes a SIGSEGV
during OpenOCD startup.
Check for pointer not NULL before dereferencing it.
Change-Id: Id115e28be23a957fef1b97ab66d7273f0ea0dce4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8216
Tested-by: jenkins
The code for cortex_a allocates the register cache during the very
first examine of the target.
To prevent a segmentation fault in assert_reset(), the call to
register_cache_invalidate() is guarded by target_was_examined().
But for targets with -defer-examine, the target is set as not
examined in handle_target_reset() just before entering in
assert_reset().
This causes registers to not be invalidated while reset a target
examined but with -defer-examine.
Change the condition and invalidate the register cache if it has
been already allocated.
Change-Id: I81ae782ddce07431d5f2c1bea3e2f19dfcd6d1ce
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8215
Tested-by: jenkins
The code for aarch64 allocates the register cache during the very
first examine of the target.
To prevent a segmentation fault in assert_reset(), the call to
register_cache_invalidate() is guarded by target_was_examined().
But for targets with -defer-examine, the target is set as not
examined in handle_target_reset() just before entering in
assert_reset().
This causes registers to not be invalidated while reset a target
examined but with -defer-examine.
Change the condition and invalidate the register cache if it has
been already allocated.
Change-Id: Ie13abb0ae2cc28fc3295d678c4ad1691024eb7b8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8214
Tested-by: jenkins
Prevent a segmentation fault by preventing to try to halt a target
that has not been examined yet.
Change-Id: I5d344e7fbdb5422f7c5e2c39bdd48cbc6c2a3e58
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8213
Tested-by: jenkins
Commit 16b4b8cf54 ("Cortex-M3: expose most DWT registers") added
the DWT registers to the list of CPU registers.
The commit message from 2009 reports the reason behind this odd
mixing of CPU and DWT registers.
This feature got broken in 2017 with the introduction of the field
struct reg::exist and its further use in the code. As result, the
command 'reg' on a target Cortex-M reports only the core registers
and then the header line
===== Cortex-M DWT registers
not anymore followed by the DWT registers.
Fix it by tagging each DWT registers as existing.
Change-Id: Iab026e7da8d6b8ba052514c3fd3b5cdfe301f330
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: b5964191f0 ("register: support non-existent registers")
Reviewed-on: https://review.openocd.org/c/openocd/+/8198
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Move setting of do_reconnect flag from swd_run_inner()
to swd_run(). Reconnect is not used at the inner level
and the flag had to be cleared after swd_run_inner()
to prevent recursion.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ib1de80bbdf10d1cbfb1dd351c6a5658e50d12af2
Reviewed-on: https://review.openocd.org/c/openocd/+/8155
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The file 'list.h', copied from FreeBSD, does not depend from any
OpenOCD specific include file, but only needs 'stddef.h' for the
type 'size_t'.
Let 'list.h' to include the correct header file, then fix the now
broken dependencies in the other files that were incorrectly
relying on 'list.h' to include 'helper/types.h'
Change-Id: Idd31b5bf607e226cac44ef41b2aa335ae4dbf519
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8173
Tested-by: jenkins
ADIv6 brought more complicated rules for DP reg 0 banking.
Neither the original implementation [1] nor the later
modification [2] respected that the DP reg 0 is banked
for read only, not for write. Enforcing of an useless
SELECT write before a write to ABORT register may trigger
FAULT (CTRL/STAT bits ORUNDETECT and STICKYORUN are set)
or WAIT (DP is stalled by an outstanding previous operation)
and therefore make ABORT register virtually unusable
on some adapters (bitbang, CMSIS-DAP).
There are DP ABORT specific functions swd_queue_ap_abort()
and swd_clear_sticky_errors() which worked around the problem
using the lowest level swd->write_reg(). Using a specific
write procedure for a single DP register was error prone
(there are other DP_ABORT writes using swd_queue_dp_write_inner())
and also the Tcl command 'xx.dap dpreg 0 value' suffered
from unwanted SELECT write.
Other smaller discords in DP banking probably do not
influence normal DP operation however they may complicate
debugging in corner cases.
Adhere strictly to the DP banking rules for both ADI versions.
Fixes: [1] commit 72fb88613f ("adiv6: add low level swd transport")
Fixes: [2] commit ee3fb5a0ea ("target/arm_adi_v5: fix DP SELECT logic")
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I3328748c1c3e0661c5ecd6eb070ac519b190ace2
Reviewed-on: https://review.openocd.org/c/openocd/+/8154
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Allow direct pointer to struct adiv5_private_config
for targets with adiv5_private_config inside of a bigger
private config container. Use it instead of the private_config
pointer toggling hack in aarch64.c
Allow optional use of -dap parameter and use it instead
of the static variable hack in xtensa_chip.c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I7260c79332940adfa49d57b45cae39325cdaf432
Reviewed-on: https://review.openocd.org/c/openocd/+/8138
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
After commit d9b2607ca0 ("gdb_server: support sparse register
maps"), GDB crashes while requesting the value of 'cpsr' because
the fake register is tagged as not existing.
Change the logic and set all register as existing, while still
limiting the list for the initial GDB request at connect.
Change-Id: I1c4e274c06147683db2a59a8920ae5ccd863e15c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8163
Tested-by: jenkins
Fix obsoleted references to Cortex-M3 from the time
when M3 was the only supported Cortex.
Fix typo.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I6f93265f1b9328fec063fecd819210deb28aaf2c
Reviewed-on: https://review.openocd.org/c/openocd/+/8099
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In 2008 the commit 1829361253 ("define resetting
the target into the halted or running state as an atomic operation.")
introduced the target_halt() call to the end of cortex_m3_assert_reset(),
Checkpatch-ignore: GIT_COMMIT_ID
A year later the commit ed36a8d15d
("... Updated halt handling for cortex_m3")
prevented cortex_m3_halt() take any action in case of TARGET_RESET state.
This narrowed the target_halt() called from cortex_m3_assert_reset()
to setting target->halt_issued and storing a time stamp.
Introducing ocd_process_reset(_inner) made the setting of halt_issued
and halt_issued_time useless. The Tcl function waits for halt
of all targets if applicable.
cortex_m_halt() and also target_halt() does not work as expected
if the cached target state is TARGET_RESET (although the core could
be out of reset and ready to be halted, just have not been polled).
Explicit Tcl arp_poll must be issued in many scenarios.
Remove the useless hack.
Also remove the explicit error return from cortex_m_halt_one()
in case of RESET_SRST_PULLS_TRST and asserted srst. If the communication
with the target is gated by any reset, cortex_m_write_debug_halt_mask()
fails. Propagate the error return of this call instead.
Change-Id: I0da05b87f43c3d0facb78e54d8f00c1728fe7c46
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8098
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In a corner case when debug_ap is not available,
cortex_m_assert_reset() asserts reset to restore
communication with the target.
Prevent to do so on targets with defer_examine,
as such targets need some special handling to enable them
after reset anyway.
The change makes possible to handle a multicore Cortex-M SoC with
an auxiliary Cortex-M core(s) switched of by default
even with 'reset_config srst_gates_jtag'
Change-Id: I8cec7a816423e588d5e2e4f7904c81c776eddc42
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8097
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The target esirisc does not free the allocated memory resources,
causing memory leaks at OpenOCD exit.
Add esirisc_free_reg_cache() and esirisc_deinit_target() and use
them to free all the allocated resources.
Change-Id: I17b8ebff54906fa25a37f2d96c01d010a98cffbd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8094
Tested-by: jenkins
Reviewed-by: Steven Stallion <sstallion@gmail.com>
The function in question does not need to change target state. It is a
target-type-dependant function, however, IMHO, it is safe to assume that
any target type would not need to change type-independant state of a
target to figure out the arch.
Change-Id: I607cb3aee6529cd5a97bc1200a0226cf6ef43caf
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8093
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There are quite a lot of "getters" in target interface.
They do not change target structure, nevertheless the structure is
passed to these functions via a plain pointer.
The intention is to clarify the purpouse of these functions by passing
the `target` structure as a pointer to constant data.
Change-Id: Ida4a798da94938753b86a293a308d93b091d1bf3
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8092
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag configure
- jtag cget
While there, add the missing .usage field.
Change-Id: I97ddc4898259ddb7fd2d057a997f33a6f4b0e2a8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8058
Tested-by: jenkins
clang build triggers an error for an uninitialized value of the
variable 'instr'.
This is a false positive, as the macro
#define MIPS32_CONFIG3_ISA_MASK (3 << MIPS32_CONFIG3_ISA_SHIFT)
guarantees the switch/case already covers all the possible values
with cases 0, 1, 2 and 3.
Silent clang by adding a useless default case to the switch.
While there, fix the indentation of the switch/case accordingly to
OpenOCD coding style.
Change-Id: I0ae316754ce7d091dd8366bf314b8e6ee780e313
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 7de4b1202d ("target/mips32: add cpu info detection")
Reviewed-on: https://review.openocd.org/c/openocd/+/8065
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Commit e370e06b72 ("target: Deprecate 'array2mem' and
'mem2array''") has already replaced the deprecated root versions
of commands mem2array and array2mem with TCL proc's that use
'read_memory' and 'write_memory'. It has left the deprecated code
of the target's version of the commands because the effort to code
the TCL replacement was not considered valuable.
To drop the last jim_handler commands, I consider much easier and
less error-prone to code them in TCL instead of converting the
deprecated code to COMMAND_HANDLER.
Drop the code in target.c and extend the TCL proc's.
While there, add the TCL procs to _telnet_autocomplete_skip.
Change-Id: I97d2370d8af479434ddf5af68541f90913982bc0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8052
Tested-by: jenkins
When requested by the core code (handle_breakpoints = true),
arc_resume() should be able to advance over a potential breakpoint set
at the resume address instead of getting stuck in one place. This is
achieved by removing the breakpoint, executing one instruction,
resetting the breakpoint, then proceeding forward as normal.
With this patch applied, openocd is now able to resume from a
breakpoint halt when debugging ARCv2 targets via telnet.
This has previously been committed to the Zephyr project's openocd repo
(see https://github.com/zephyrproject-rtos/openocd/pull/31).
Change-Id: I17dba0dcea311d394b303c587bc2dfaa99d67859
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Artemiy Volkov <artemiy@synopsys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7817
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Presently, we rely on gdb to restore break/watchpoints upon resuming
execution in arc_resume(). To match this behavior in absence of gdb
(more specifically, when handle_breakpoints is true), this patch
explicitly re-enables all breakpoints and watchpoints in arc_resume().
This has previously been committed to the Zephyr project's openocd repo
(see https://github.com/zephyrproject-rtos/openocd/pull/31).
Change-Id: I59e9c91270ef0b5fd19cfc570663dc67a6022dbd
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Artemiy Volkov <artemiy@synopsys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7816
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
