Unlike other devices supported by this driver STM32U5 devices
have a new UNLOCK bit in FLASH_WRP1AR, WRP1BR, WRP2AR, WRP2BR
registers. Writing zero to this bit makes the write protection
block permanent with no way to unprotect.
Commit 6554d176e9 ("flash/stm32l4x: support STM32U59/U5Ax devices")
and later commits with additional U5 devices lack support for
the UNLOCK bit and therefore makes write protection permanent
without warning.
Introduce the new bit flag F_WRP_HAS_LOCK and mark U5 devices by it.
Set UNLOCK bit in stm32l4_write_one_wrpxy() if F_WRP_HAS_LOCK is set.
Change-Id: I26b97d855e094a21540e3377f367520683af2eac
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8981
Tested-by: jenkins
Especially after the flash probe (used in gdb-attach event)
we need to completely restore the original security state to allow
'resume' or gdb 'continue' without injecting strange errors
to application code.
Save all ACCESSCTRL registers potentially changed by triggering CFGRESET.
Restore them at cleanup.
Fixes: commit ea775d49fc ("flash/nor/rp2040: add RP2350 support")
Change-Id: I964886d5b1d0269497c343811ee4dcd5c31953db
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8961
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
RP2040 and RP2350 flash driver runs a ROM API target algorithm
in probe to setup QSPI command interface. The Cortex-M33 core
of RP2350 has to be in secure mode with SAU and MPU switched off
to ensure ROM API call working properly.
Especially after the flash probe (used in gdb-attach event)
we need to completely restore the original security state to allow
'resume' or gdb 'continue' without injecting strange errors
to application code.
Use cortex_m support to set secure mode and to restore it back.
Fixes: commit ea775d49fc ("flash/nor/rp2040: add RP2350 support")
Change-Id: I72096bfecbb45a8aa4d3a7a37ad140532b3b00b2
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8960
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Instead of using NULL terminated arrays to determine the last
element of the array, use the size of the array.
Change-Id: I532a51a223061348e57bae3bd66ee6b346c1b070
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8949
Tested-by: jenkins
Reviewed-by: Brandon Martin
Instead of using NULL terminated arrays to determine the last
element of the array, use the size of the array.
Change-Id: Ia3d739b0a9f201ba2e7b1d1244d60c8e5546c9c1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8947
Reviewed-by: Brandon Martin
Tested-by: jenkins
fallback programming without loader when resources are not available
while at there refactor reused code
(wait for interrupt and command execution)
Change-Id: I2cba0f53d3470bc324f4a72614c236cebf196f64
Signed-off-by: BOCHKATI Tarek <tarek.bochkati@st.com>
Signed-off-by: HAOUES Ahmed <ahmed.haoues@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8883
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This command allows to read non-memory mapped flash content directly
via Tcl script. The API is the same as for the 'read_memory' command
for targets.
Change-Id: I4a8d0d7ea2f778ac8f1501227b60b964c881cb84
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8634
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
P25Q16 can be found in the Efinix T13/20Q100F3, so that one is necessary
for jtagspi on those chips. The other ones were added for completeness.
Change-Id: Ifb6f3c6fbd23938d6fd26bce7742c3484ece130c
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8223
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Use proper format specifiers for uint16_t and uint32_t arguments.
Use LOG_TARGET_DEBUG instead of target->cmd_name as a parameter.
Use command_print() in command handler.
Drop dots and new lines at end of messages.
Change-Id: I37c7d3680a352210b1d7e69f2c9b4ba0efe6ec15
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reported-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8809
Tested-by: jenkins
Calling ROM API set_bootrom_stack() function allows ROM API functionality
after OpenOCD halt or reset halt in RISC-V bootloder (emulated ARM code)
Change-Id: I3b255738d61876e876a94207804d9cbe1a7593c2
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Signed-off-by: Luke Wren <luke@raspberrypi.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8729
Tested-by: jenkins
struct rp2xxx_rom_call_batch_record consists of uint32_t in the host
endianness. Therefore it should be converted to the target endianness
not just simply copied by target_write_buffer().
Concatenate algo code, converted batch records and terminator
to the host resident buffer and copy it at once to the target and
save some adapter turnaround times.
While on it remove typedef rp2xxx_rom_call_batch_record_t
Change-Id: I0e698396003869bee5dde4141d48ddd7d62b3cbc
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8460
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
The compiler knows what variable remains constant during its lifetime
and there is no need to emphasise constantness.
Change-Id: Ib515f96a3c77afea87274f33b8ccac7a71bfb932
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8459
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
While on it use calloc() instead of malloc()/memset()
Drop useless implementation of rp2040_flash_free_driver_priv()
- exactly same as default_flash_free_driver_priv()
Code style fixes forced by checkpatch
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I5c56c4a7d586c0dcab164a45e8f6200ea9a3bd1d
Reviewed-on: https://review.openocd.org/c/openocd/+/8455
Tested-by: jenkins
Invalidate cache and restore flash XIP mode after erase and also
in error cleanup after write/erase.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: If7e0c2d75f50f923e6bcbf0aa7bab53fe91b6cc8
Reviewed-on: https://review.openocd.org/c/openocd/+/8454
Tested-by: jenkins
While on it:
Define the names for the fixed flash page/sector sizes and use them
instead of magic values.
Fix memory leak on error return.
Partially backported from former upstream rp2040.c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: If51c912f4d381ee47756a70f616ecdbee1ac0da7
Reviewed-on: https://review.openocd.org/c/openocd/+/8453
Tested-by: jenkins
Flash erase and write require this guard, unfortunately it is also
partially needed in the flash probe.
Partially backported from former upstream rp2040.c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ie8a240e66c3ed68e08f872cbbfdd90a6d80e1f1e
Reviewed-on: https://review.openocd.org/c/openocd/+/8452
Tested-by: jenkins
Also keep size override by FLASHSIZE Tcl variable possible.
Partially backported from former upstream rp2040.c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I224c3644450e8b46e35714bfc5436219ffdee563
Reviewed-on: https://review.openocd.org/c/openocd/+/8451
Tested-by: jenkins
RP2350 can switch either core to Cortex-M33 or RISC-V.
The different architectures have to be supported as
distinct targets in OpenOCD.
Introduce 'rp2xxx _switch target' Tcl command to adapt flash
bank to architecture changes.
Keep the target and priv pointers intact until a flash operation
is finished to prevent sudden change in the middle of write/erase.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I764354ab469e253042128958dfe70c09d04d6411
Reviewed-on: https://review.openocd.org/c/openocd/+/8448
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The new flash command could be handy for a reboot to BOOTSEL mode
and for making (Q)SPI flash content visible at 0x10xxxxxx
address mapping area after a rescue reset.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I1b532afcc41a4051298313e685658e86c02c53f9
Reviewed-on: https://review.openocd.org/c/openocd/+/8447
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
And add support for A1 ROM table.
TV: cortex_m smp change removed.
Fixed style problems.
'uint' replaced by unsigned int
Change-Id: Iff2710fa0734dc7074d8d490d8fae43dc27c0c2a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Signed-off-by: Luke Wren <wren6991@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8441
Tested-by: jenkins
The driver directly runs a TCL command that has been renamed with
commit 4d99e77419 ("jtag/hla: Restructure commands"), while the
original name has been deprecated.
Update the TCL command to the new syntax.
Change-Id: I2fc9ef9a209bae1d78951e253d54164b2ac00cdd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 4d99e77419 ("jtag/hla: Restructure commands")
Reviewed-on: https://review.openocd.org/c/openocd/+/8832
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Add basic flashing support for Texas Instruments MSPM0L, C and G
family of Cortex-M0 based micro-controllers.
This initial basic flashing support allows for controlling protection,
erase, write and read of non-main flash region.
This has been tested with:
* Valgrind (3.22.0):
valgrind --leak-check=full --show-leak-kinds=all \
--track-origins=yes --verbose
* Ubuntu clang version 20.0.0
(++20241014053649+ed77df56f272-1~exp1~20241014053827.1987)
Valgrind-clean, no new Clang analyzer or sparse warnings have been
introduced.
Change-Id: I29b8055ea6da9c38c5b7b91bea1ec7581c5bc8ff
Co-developed-by: Henry Nguyen <h-nguyen8@ti.com>
Signed-off-by: Henry Nguyen <h-nguyen8@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8384
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
`struct rsl10_info *chip` is only used in `rsl10_protect_check()` in an
assertion triggerring `-Wunused-variable` when compiled with `DNDEBUG`.
Drop it.
Change-Id: Ib302aea742131479f04f32e8fe8a88a3230ae203
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8755
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Driver for DesignWare SPI controller, found on many SoCs (see compatible
list in Linux device tree bindings
Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml). This
implementation only supports MIPS as it was the only one available for the
tests, however, adding support for other architectures should require only
few adjustments. Driver relies on flash/nor/spi.h to find Flash chip info.
Driver internal functions support 24bit addressing mode, but due to
limitations of flash/nor/spi.h, it is not used. The reported writing speed
is about 60kb/s.
Lint, sanitizer and valgrind reported warnings were not related to the
driver.
Change-Id: Id3df5626ab88055f034f74f274823051dedefeb1
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8400
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
If the device has at lest one FlexNVM bank and it is set as EE backup
only, the bank has no protection blocks.
kinetis_fill_fcf() collects protection data from all banks before
flash write of the sector containing FCF block. In case it encountered
a FlexNVM bank with no protection blocks assert failed.
Failed flash write of previously erased FCF block could cause
engaging debugging lock (if the device was run or reset).
Skip banks with zero protection blocks.
Replace assert() by LOG_ERROR() as we have to finish FCF write.
Change-Id: Ibe7e7ec6d0db4453b8a53c8256987621b809c99d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Suggested-by: Jasper v. Blanckenburg <jazzpi@users.sourceforge.net>
Fixes: https://sourceforge.net/p/openocd/tickets/448/
Reviewed-on: https://review.openocd.org/c/openocd/+/8719
Tested-by: jenkins
Reviewed-by: Jasper v. Blanckenburg <jasper@mezzo.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
https://review.openocd.org/c/openocd/+/8439 changed variable `words`
from uint8_t to unsigned int in sfdp.c but failed to update the
LOG_DEBUG line to reflect the new type. On macOS this caused:
src/flash/nor/sfdp.c:107:28: error: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Werror,-Wformat]
The formatting of the debug line has been updated to reflect the updated
type.
Change-Id: Ifc7ddb1279ab2603901c969d9c09af847f3a3caf
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8660
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fix checkpatch errors:
ERROR:BOOL_COMPARISON: Using comparison to true/false is
error prone
While there,
- drop useless parenthesis,
- drop unnecessary else after a return.
Change-Id: I1234737b3e65bd10df5e938d1c36f9abaf02d348
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8496
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
