Files
openocd/src/flash/nor
Esben Haabendal 32b67ee3c9 cfi: support for 16-bit flash with reversed endianness
This is for targets where flash controller has reverse endianness
compared to target.  For these, the 'bus_swap' parameter can be given to the
CFI driver, which will cause command CFI commands to be written with
bytes swapped.  This is only for x16 CFI flash.

Change-Id: I698b768e92e65d160232e90b0e81a824e3c81a46
Signed-off-by: Esben Haabendal <esben@haabendal.dk>
Reviewed-on: http://openocd.zylin.com/3041
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13 23:09:40 +00:00
..
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2013-10-07 19:28:19 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2014-10-06 11:57:32 +00:00
2013-06-05 19:52:42 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2016-01-29 05:41:53 +00:00
2013-06-05 19:52:42 +00:00
2015-10-09 13:45:07 +01:00
2014-03-17 12:47:18 +00:00
2013-06-05 19:52:42 +00:00
2014-02-06 22:17:51 +00:00
2015-10-30 23:20:29 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2015-11-03 22:14:07 +00:00
2014-03-17 12:47:18 +00:00
2014-03-17 12:47:18 +00:00
2015-12-18 18:17:06 +00:00