4dc8cd201c
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
105 lines
3.8 KiB
Plaintext
105 lines
3.8 KiB
Plaintext
ACTION!="add|change", GOTO="openocd_rules_end"
|
|
SUBSYSTEM!="usb|tty|hidraw", GOTO="openocd_rules_end"
|
|
|
|
# Olimex ARM-USB-OCD
|
|
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0003", MODE="664", GROUP="plugdev"
|
|
|
|
# Olimex ARM-USB-OCD-H
|
|
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002b", MODE="664", GROUP="plugdev"
|
|
|
|
# Olimex ARM-USB-OCD-TINY
|
|
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0004", MODE="664", GROUP="plugdev"
|
|
|
|
# Olimex ARM-JTAG-EW
|
|
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="001e", MODE="664", GROUP="plugdev"
|
|
|
|
# Olimex ARM-USB-OCD-TINY-H
|
|
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002a", MODE="664", GROUP="plugdev"
|
|
|
|
# USBprog with OpenOCD firmware
|
|
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="664", GROUP="plugdev"
|
|
|
|
# Amontec JTAGkey and JTAGkey-tiny
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="664", GROUP="plugdev"
|
|
|
|
# Amontec JTAGkey-HiSpeed
|
|
ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="664", GROUP="plugdev"
|
|
|
|
# Axiom AXM-0432 Link (Symphony SoundBite?)
|
|
# Calao Systems USB-A9260-C01
|
|
# TinCanTools Flyswatter
|
|
# OOCD-Link
|
|
# Marvell Sheevaplug (early development versions)
|
|
# DLP Design DLP-USB1232H USB-to-UART/FIFO interface module
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="664", GROUP="plugdev"
|
|
|
|
# Calao Systems USB-A9260-C02
|
|
# Bus Pirate
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="664", GROUP="plugdev"
|
|
|
|
# IAR J-Link USB
|
|
ATTRS{idVendor}=="1366", ATTRS{idProduct}=="0101", MODE="664", GROUP="plugdev"
|
|
|
|
# Raisonance RLink
|
|
ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="664", GROUP="plugdev"
|
|
|
|
# Hitex STR9-comStick
|
|
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002c", MODE="664", GROUP="plugdev"
|
|
|
|
# Hitex STM32-PerformanceStick
|
|
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002d", MODE="664", GROUP="plugdev"
|
|
|
|
# TI/Luminary Stellaris Evaluation Board FTDI (several)
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd9", MODE="664", GROUP="plugdev"
|
|
|
|
# TI/Luminary Stellaris In-Circuit Debug Interface FTDI (ICDI) Board
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcda", MODE="664", GROUP="plugdev"
|
|
|
|
# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
|
|
ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="664", GROUP="plugdev"
|
|
|
|
# Xverve Signalyzer Tool (DT-USB-ST)
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca0", MODE="664", GROUP="plugdev"
|
|
|
|
# egnite Turtelizer 2
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="664", GROUP="plugdev"
|
|
|
|
# Marvell Sheevaplug
|
|
ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="664", GROUP="plugdev"
|
|
|
|
# Section5 ICEbear
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c140", MODE="664", GROUP="plugdev"
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c141", MODE="664", GROUP="plugdev"
|
|
|
|
# Hilscher NXHX Boards
|
|
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="664", GROUP="plugdev"
|
|
|
|
# Debug Board for Neo1973
|
|
ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="664", GROUP="plugdev"
|
|
|
|
# XDS100v2
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="664", GROUP="plugdev"
|
|
|
|
# stlink v1
|
|
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3744", MODE="664", GROUP="plugdev"
|
|
|
|
# stlink v2
|
|
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE="664", GROUP="plugdev"
|
|
|
|
# opendous and estick
|
|
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="664", GROUP="plugdev"
|
|
|
|
# mbed CMSIS-DAP
|
|
ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="664", GROUP="plugdev"
|
|
KERNEL=="hidraw*", ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="664", GROUP="plugdev"
|
|
|
|
# Freescale Freedom Board CMSIS-DAP
|
|
ATTRS{idVendor}=="c251", ATTRS{idProduct}=="f002", MODE="664", GROUP="plugdev"
|
|
KERNEL=="hidraw*", ATTRS{idVendor}=="c251", ATTRS{idProduct}=="f002", MODE="664", GROUP="plugdev"
|
|
|
|
# Keil ULINK2 CMSIS-DAP
|
|
ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2722", MODE="664", GROUP="plugdev"
|
|
KERNEL=="hidraw*", ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2722", MODE="664", GROUP="plugdev"
|
|
|
|
LABEL="openocd_rules_end"
|