52ea420dd2
simplify ipdbg commands: $hub_name ipdbg start -> $hub_name start ipdbg/fix: While there, handle the multi-word deprecated commands by adding quotes. Change-Id: I5a56df2dbf2a5710442242727fa9384e5541ed53 Signed-off-by: Daniel Anselmi <danselmi@gmx.ch> Fixes: https://sourceforge.net/p/openocd/tickets/434/ Reported-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8873 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
31 lines
985 B
INI
31 lines
985 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# Trion® T20 BGA256 Development Kit
|
|
# https://www.efinixinc.com/docs/trion20-devkit-ug-v1.5.pdf
|
|
#
|
|
# works after power cycle or pushing sw1.
|
|
# it is because we cannot control CDONE which is connected to ftdi channel 0
|
|
# note from an006: For JTAG programming, T4, T8, T13, and T20 FPGAs use the
|
|
# CRESET_N and SS_N pins in addition to the standard JTAG pins.
|
|
|
|
adapter driver ftdi
|
|
ftdi vid_pid 0x0403 0x6010
|
|
|
|
ftdi channel 1
|
|
ftdi layout_init 0x0008 0x008b
|
|
reset_config none
|
|
transport select jtag
|
|
adapter speed 6000
|
|
|
|
source [find fpga/efinix_trion.cfg]
|
|
|
|
#openocd -f board/trion_t20_bga256.cfg -c "init" -c "pld load trion.pld outflow/trion_blinker.bit"
|
|
#ipdbg create-hub trion.ipdbghub -tap trion.tap -ir 0x8
|
|
#trion.ipdbghub start -tool 0 -port 5555
|
|
|
|
set JTAGSPI_CHAIN_ID trion.pld
|
|
source [find cpld/jtagspi.cfg]
|
|
|
|
#jtagspi_init trion.pld "trion_jtagspi/outflow/trion_jtagspi.bit" 0xAB
|
|
#jtagspi_program trion_blinker/outflow/trion_blinker.bin 0
|