Antonio Borneo 5babb63462 stlink: fix printed version for new STM8 nucleo board ...

The ST-LINK/V2.1 embedded in the new nucleo boards for STM8 does
not follow the normal versioning rules, and puts mass-storage and
swim version in the field normally used respectively for jtag and
mass-storage version.

Apply the check suggested by STMicroelectronics to discriminate
the two cases and print the correct version.

Change-Id: I0dd1da11013be3f1e56084489e28cfba98bb07af
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4716
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>

2018-12-06 13:06:34 +00:00

..

libjaylink @ 8645845c1a

libjaylink: Update to latest Git version

2017-10-03 11:18:26 +01:00

OpenULINK

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

usb_blaster

usb_blaster: Don't unnecessarily go through DR-/IR-Pause

2018-07-24 13:07:44 +01:00

versaloon

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

amt_jtagaccel.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

arm-jtag-ew.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

at91rm9200.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

bcm2835gpio.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

bitbang.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

bitbang.h

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

bitq.c

jtag/bitq: array boundary overflow

2018-11-10 21:15:39 +00:00

bitq.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

buspirate.c

jtag: drivers: buspirate: fix abuse of "char" type

2018-03-12 18:59:32 +00:00

cmsis_dap_usb.c

drivers/cmsis-dap: speed up sending multiple HID requests

2018-10-28 07:29:41 +00:00

driver.c

jtag: make cmd_queue_scan_field_clone public

2018-10-16 11:58:17 +01:00

dummy.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

ep93xx.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

ft232r.c

jtag: drivers: ft232r: unhardcoded

2018-12-06 08:51:01 +00:00

ftdi.c

ftdi: demote unhelpful debug messages

2018-10-16 18:07:02 +01:00

gw16012.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

imx_gpio.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

jlink.c

target/armv7m_trace: Use prefix for enums

2018-07-19 10:49:24 +01:00

jtag_vpi.c

Set TCP_NODELAY for local connections to jtag_vpi.

2018-11-26 09:35:48 +00:00

kitprog.c

Fix warnings exposed by GCC8

2018-05-30 09:36:46 +01:00

libusb0_common.c

libusb: Add transfer type filter to get correct ep

2017-04-24 22:31:41 +01:00

libusb0_common.h

libusb: Add transfer type filter to get correct ep

2017-04-24 22:31:41 +01:00

libusb1_common.c

libusb: return oocd error values

2018-09-07 08:18:53 +01:00

libusb1_common.h

libusb: Add transfer type filter to get correct ep

2017-04-24 22:31:41 +01:00

libusb_common.h

Convert to non-recursive make

2016-12-08 16:23:10 +00:00

Makefile.am

jtag/drivers: Add support for TI XDS110 debug probe

2018-05-31 13:25:16 +01:00

Makefile.rlink

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

minidriver_imp.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

mpsse.c

ftdi: extend ftdi_location format

2018-09-10 11:55:43 +01:00

mpsse.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

opendous.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

openjtag.c

libusb: Add transfer type filter to get correct ep

2017-04-24 22:31:41 +01:00

osbdm.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

parport.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

presto.c

Use timeval helpers

2018-01-25 16:43:49 +00:00

remote_bitbang.c

Add read buffer to bitbang, improving performance.

2018-01-25 16:44:06 +00:00

rlink_call.m4

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

rlink_dtc_cmd.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

rlink_ep1_cmd.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

rlink_init.m4

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

rlink_speed_table.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

rlink_st7.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

rlink.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

rlink.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

stlink_usb.c

stlink: fix printed version for new STM8 nucleo board

2018-12-06 13:06:34 +00:00

sysfsgpio.c

jtag: drivers: sysfsgpio: lift upper gpio number limit

2018-05-31 13:25:30 +01:00

ti_icdi_usb.c

jtag: drivers: stlink: handle all versions with single config

2017-12-12 21:13:55 +00:00

ulink.c

jtag: drivers: ulink: fix uninitialised variable warning

2016-12-25 09:17:30 +00:00

usb_common.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

usb_common.h

Make #include guard naming consistent

2016-05-24 22:30:55 +01:00

usbprog.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

vsllink.c

Remove FSF address from GPL notices

2016-05-24 22:30:01 +01:00

xds110.c

drivers: xds110: Remove unnecessary and deprecated libusb function.

2018-06-06 15:50:39 +01:00