Jose de Sousa 5bc0dc0c9d target: write gmon.out according to target endianness ...

After profiling gmon.out was being written in little endian format only
which would cause gprof to issue and error and exit on big endian targets.

Change-Id: I526a40adae0f9a439fc5b77cef30fda228198b48
Signed-off-by: Jose de Sousa <jose.t.de.sousa@gmail.com>
Reviewed-on: http://openocd.zylin.com/2168
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2015-02-11 15:27:18 +00:00

..

flash

mini51: support for Nuvoton NuMicro M051 series flash memory

2015-02-11 15:23:09 +00:00

helper

configure: define WIN32_LEAN_AND_MEAN early to make it effective

2015-02-04 21:56:55 +00:00

jtag

jlink: Added hardware version number for JLink firmware on LPC-Link2

2015-02-11 15:10:53 +00:00

pld

update files to correct FSF address

2013-06-05 19:52:42 +00:00

rtos

ChibiOS: struct ChibiOS_params_list[] should not be const

2015-01-09 08:56:10 +00:00

server

gdb_server: Include current RTOS thread in signal packets

2014-09-29 20:11:59 +00:00

svf

Openocd: svf: Add ability to ignore svf_check_tdo errors

2014-07-03 18:08:48 +00:00

target

target: write gmon.out according to target endianness

2015-02-11 15:27:18 +00:00

transport

transport: clarify error message when transport is not selected

2015-01-09 08:48:18 +00:00

xsvf

update files to correct FSF address

2013-06-05 19:52:42 +00:00

hello.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

hello.h

update files to correct FSF address

2013-06-05 19:52:42 +00:00

main.c

update files to correct FSF address

2013-06-05 19:52:42 +00:00

Makefile.am

Makefile.am: link libusb-1.0 after libusb-0.1 to fix dependencies

2015-02-04 21:56:45 +00:00

openocd.c

Fix some problems with the bin2char utility

2014-08-02 09:01:32 +00:00

openocd.h

Fix some problems with the bin2char utility

2014-08-02 09:01:32 +00:00