Files
openocd/src/flash/nor
Daniel Serpell 9d97cace0e flash/nor/spi: Add some zbit flash chips.
I have a RP2020 board from aliexpress that uses the ZB25VQ32 flash, this
allows openocd to correctly identify it with the full flash size.

I also added other models, the datasheets can be found at:

Link: https://datasheet.lcsc.com/lcsc/2203210916_Zbit-Semi-ZB25VQ16ASIG_C2982491.pdf
Link: https://datasheet.lcsc.com/lcsc/2003141132_Zbit-Semi-ZB25VQ32BSIG_C495744.pdf
Link: https://datasheet.lcsc.com/lcsc/2003141132_Zbit-Semi-ZB25VQ64ASIG_C495745.pdf
Link: https://datasheet.lcsc.com/lcsc/2006151421_Zbit-Semi-ZB25VQ128ASIG_C609616.pdf

As noted by Andreas Bolsch, the devices supporting QSPI have different
ID in QPI mode than SPI, so two entries are needed in the table for each
one.

Use 0x0B as qread command, as this does not need the dummy M7-0
parameters.

Signed-off-by: Daniel Serpell <daniel.serpell@gmail.com>
Change-Id: Id99187b1963b02ac1a786b66bb352f5f48ed0ac2
Reviewed-on: https://review.openocd.org/c/openocd/+/7445
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2023-02-03 22:45:20 +00:00
..
2022-12-17 09:33:40 +00:00
2023-01-15 14:47:30 +00:00
2022-08-27 16:19:16 +00:00