63763345d9
The Redbee Econotag is an open hardware development kit from
Redwire, LLC (www.redwirellc.com/store), for the Freescale
MC13224V ARM7TDMI + 802.15.4 radio.
It includes both an MC13224V and an FT2232H (for JTAG and UART
support). It has flexible power supply options.
Additional features are:
- inverted-F pcb antenna
- 36 GPIO brought out to 0.1" pin header
(includes all peripheral pins)
- Reset button
- Two push buttons (on kbi1-5 and kbi0-4)
- USB-A connector, powered from USB
- up to 16V external input
- pads for optional buck inductor
- pads for optional 32.768kHz crystal
- 2x LEDS on TX_ON and RX_ON
[ dbrownell@users.sourceforge.net: shrink lines; texi ]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
9 lines
242 B
INI
9 lines
242 B
INI
source [find target/mc13224v.cfg]
|
|
|
|
# The redbee-econotag has an onboard ft2232h with channel A wired
|
|
# to the JTAG pins on the mc13224v
|
|
# channel B is wired to UART1
|
|
interface ft2232
|
|
ft2232_layout redbee-econotag
|
|
ft2232_vid_pid 0x0403 0x6010
|