auracaster/openocd
3
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
b5fa1e4d7779ca3a7f3de7d5cd3f0732ec8a11ff
openocd/tcl/board
History
Felipe Balbi e4848fe043 board: ti_am437x_idk: default to 1000kHz 
16000kHz is only safe after PLLs have been locked
properly. Until that's done (with reset init), we
can only safely run at 1000kHz.

Change-Id: I4e0a17e88aa9919cd6c34d44da68e23115c0d3a3
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/3015
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-13 06:59:12 +00:00
..
actux3.cfg
actux3.cfg: add function to setup for u-boot debugging
2011-01-02 21:17:57 +01:00
adapteva_parallella1.cfg
tcl/board: Add Parallella-I board config
2015-09-30 22:10:55 +01:00
alphascale_asm9260_ek.cfg
tcl/target|board: add configs for Alphascale asm9260t
2015-02-22 17:57:02 +00:00
altera_sockit.cfg
Add tcl configurations for Altera Soc devices
2013-08-15 14:50:22 +00:00
am3517evm.cfg
AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.
2010-09-20 09:17:28 +02:00
arm_evaluator7t.cfg
Remove annoying end-of-line whitespace from tcl/* files
2009-09-21 18:48:22 +00:00
asus-rt-n16.cfg
tcl: add bcm47xx config and Asus RT-N16 board using it
2014-01-08 22:18:18 +00:00
asus-rt-n66u.cfg
tcl: add ASUS RT-N66U config
2014-06-01 18:27:09 +00:00
at91cap7a-stk-sdram.cfg
target: Remove "-variant" argument
2014-09-22 19:39:24 +00:00
at91eb40a.cfg
flash: retire unused eCos flash driver
2012-03-11 21:14:21 +00:00
at91rm9200-dk.cfg
at91rm9200 : reset_config should go to the board config file
2010-05-18 11:48:47 +02:00
at91rm9200-ek.cfg
at91rm9200-ek: add low default communication speed
2011-05-05 15:43:37 +02:00
at91sam9g20-ek.cfg
at91sam9: factorise cpu support
2011-03-03 22:49:46 +01:00
at91sam9261-ek.cfg
add at91sam9261-ek support
2011-04-09 10:14:46 +02:00
at91sam9263-ek.cfg
add at91sam9263-ek support
2011-04-09 10:16:28 +02:00
atmel_at91sam7s-ek.cfg
native line endings
2009-08-21 09:01:00 +00:00
atmel_at91sam9rl-ek.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
atmel_at91sam9260-ek.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
atmel_sam3n_ek.cfg
Add configuration for ATMEL SAM3N-EK board.
2011-10-26 20:31:45 +00:00
atmel_sam3s_ek.cfg
at91sam3s* support
2010-06-25 21:37:53 +02:00
atmel_sam3u_ek.cfg
target.cfg: (re)move some bogus reset_config lines
2009-11-10 09:25:26 -08:00
atmel_sam3x_ek.cfg
Added tcl config scripts for SAM3A/X targets and devboard
2012-03-30 15:56:19 +00:00
atmel_sam4e_ek.cfg
tcl/board: add Atmel SAM4E-EK
2014-06-18 20:27:10 +00:00
atmel_sam4l8_xplained_pro.cfg
cfg: add initial Atmel xplained kit support
2014-01-09 15:22:56 +00:00
atmel_sam4s_ek.cfg
topic: Added support for the SAM4S variants
2012-04-26 10:58:14 +00:00
atmel_sam4s_xplained_pro.cfg
cfg: add initial Atmel xplained kit support
2014-01-09 15:22:56 +00:00
atmel_samc20_xplained_pro.cfg
at91samd: add chip IDs for SAMC20 and SAMC21 families
2015-08-06 13:15:19 +01:00
atmel_samc21_xplained_pro.cfg
at91samd: add chip IDs for SAMC20 and SAMC21 families
2015-08-06 13:15:19 +01:00
atmel_samd20_xplained_pro.cfg
cfg: add initial Atmel xplained kit support
2014-01-09 15:22:56 +00:00
atmel_samd21_xplained_pro.cfg
Atmel samd: add support for SAMD21
2014-01-15 11:38:25 +00:00
atmel_samg53_xplained_pro.cfg
Add support for the Atmel SAMG53
2014-03-04 20:18:37 +00:00
atmel_saml21_xplained_pro.cfg
flash: at91samd: add SAML21 support, fix part ID issue
2015-04-16 20:30:34 +01:00
atmel_samr21_xplained_pro.cfg
Adding support for the Atmel SAMR21.
2014-07-10 21:18:30 +00:00
atmel_samv71_xplained_ultra.cfg
tcl/board: add Atmel SAM V71 Xplained Ultra
2015-11-10 20:27:00 +00:00
balloon3-cpu.cfg
TCL scripts: update to current "flash bank" syntax
2010-03-26 08:42:58 +01:00
bcm28155_ap.cfg
bcm281xx: Add bcm281xx SoC and bcm28155_ap board
2014-03-09 22:33:32 +00:00
bt-homehubv1.cfg
tcl: bcm6348 target config, BT HomeHub v1 board config
2014-04-14 18:15:24 +00:00
colibri.cfg
board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013
2010-09-14 11:15:35 +02:00
crossbow_tech_imote2.cfg
rename jtag_nsrst_delay as adapter_nsrst_delay
2010-03-15 08:41:30 -07:00
csb337.cfg
rename jtag_khz as adapter_khz
2010-03-15 08:37:43 -07:00
csb732.cfg
rename jtag_nsrst_delay as adapter_nsrst_delay
2010-03-15 08:41:30 -07:00
da850evm.cfg
cfg: add omapl138 support and da850evm preliminary support
2010-08-10 09:43:30 +02:00
digi_connectcore_wi-9c.cfg
target config files: Fix whitespace issues.
2011-11-07 16:16:33 +00:00
digilent_analog_discovery.cfg
tcl/board: Add Digilent Analog Discovery config
2015-10-30 11:53:05 +00:00
digilent_atlys.cfg
tcl: Adding the Digilent Atlys board.
2015-10-21 09:11:09 +01:00
digilent_zedboard.cfg
tcl: add Zynq-7000 target and Zedboard board configs
2014-03-29 07:16:00 +00:00
diolan_lpc4350-db1.cfg
tcl/board: Add Diolan LPC4357-DB1 config
2015-10-30 13:15:31 +00:00
diolan_lpc4357-db1.cfg
tcl/board: Add Diolan LPC4357-DB1 config
2015-10-30 13:15:31 +00:00
dk-tm4c129.cfg
cfg: TI Tiva C dk-tm4c129x Evaluation Kits
2015-02-11 15:09:49 +00:00
dm355evm.cfg
TCL scripts: replace "puts" with "echo"
2010-11-09 08:12:51 +01:00
dm365evm.cfg
rename jtag_khz as adapter_khz
2010-03-15 08:37:43 -07:00
dm6446evm.cfg
TCL scripts: replace "puts" with "echo"
2010-11-09 08:12:51 +01:00
dp_busblaster_v3.cfg
tcl/board: add config for DP Bus Blaster reconfiguration
2014-03-17 12:44:19 +00:00
efikamx.cfg
target: Pull out the jtag_rtck from iMX5x files
2013-07-15 10:02:32 +00:00
efm32.cfg
Add configuration for EFM32 Gecko boards with Segger J-Link.
2015-03-25 21:40:57 +00:00
eir.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
ek-lm3s9b9x.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm3s9d92.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm3s811-revb.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm3s811.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm3s1968.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm3s3748.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm3s6965.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm3s8962.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
ek-lm4f120xl.cfg
Allow transports to override the selected target (hla configs unification)
2014-08-11 21:25:56 +00:00
ek-lm4f232.cfg
Allow transports to override the selected target (hla configs unification)
2014-08-11 21:25:56 +00:00
ek-tm4c123gxl.cfg
Allow transports to override the selected target (hla configs unification)
2014-08-11 21:25:56 +00:00
ek-tm4c1294xl.cfg
tcl/board: add TI Tiva C ek-tm4c1294xl config
2014-09-29 20:04:30 +00:00
embedded-artists_lpc2478-32.cfg
Create a init_board procedure for the ea dev board.
2012-03-30 15:53:06 +00:00
emcraft_twr-vf6-som-bsb.cfg
tcl/board: Add EmCraft VF6 SOM and baseboard configs
2015-08-06 13:08:40 +01:00
emcraft_vf6-som.cfg
tcl/board: Add EmCraft VF6 SOM and baseboard configs
2015-08-06 13:08:40 +01:00
ethernut3.cfg
TCL scripts: replace "puts" with "echo"
2010-11-09 08:12:51 +01:00
frdm-kl25z.cfg
tcl/board: frdm kinetis boards have SRST connected
2015-01-26 20:58:06 +00:00
frdm-kl46z.cfg
tcl/board: frdm kinetis boards have SRST connected
2015-01-26 20:58:06 +00:00
glyn_tonga2.cfg
Glyn Tonga2: Faster JTAG speed after CPU/RAM init.
2012-04-13 08:57:29 +00:00
gumstix-aerocore.cfg
Add support for Gumstix AeroCore device
2014-05-05 20:14:30 +00:00
hammer.cfg
TCL scripts: update to current "flash bank" syntax
2010-03-26 08:42:58 +01:00
hilscher_nxdb500sys.cfg
scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay
2012-03-30 16:01:51 +00:00
hilscher_nxeb500hmi.cfg
scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay
2012-03-30 16:01:51 +00:00
hilscher_nxhx10.cfg
scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay
2012-03-30 16:01:51 +00:00
hilscher_nxhx50.cfg
scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay
2012-03-30 16:01:51 +00:00
hilscher_nxhx500.cfg
scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay
2012-03-30 16:01:51 +00:00
hilscher_nxsb100.cfg
scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay
2012-03-30 16:01:51 +00:00
hitex_lpc1768stick.cfg
cfg: fix lpc17xx regression
2015-01-09 08:47:20 +00:00
hitex_lpc2929.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
hitex_stm32-performancestick.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
hitex_str9-comstick.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
iar_lpc1768.cfg
cfg: fix lpc17xx regression
2015-01-09 08:47:20 +00:00
iar_str912_sk.cfg
Move TCL script files -- Step 2 of 2:
2009-05-27 06:49:24 +00:00
icnova_imx53_sodimm.cfg
target: Pull out the jtag_rtck from iMX5x files
2013-07-15 10:02:32 +00:00
icnova_sam9g45_sodimm.cfg
add icnova_sam9g45_sodimm support
2012-02-13 12:04:00 +00:00
imx27ads.cfg
TCL SCRIPTS: fix command name
2010-04-15 19:10:36 +02:00
imx27lnst.cfg
rename jtag_khz as adapter_khz
2010-03-15 08:37:43 -07:00
imx28evk.cfg
topic: Add support for i.MX28EVK
2012-02-13 12:03:26 +00:00
imx31pdk.cfg
imx31pdk: use rclk w/1MHz fallback
2010-10-28 08:43:04 +02:00
imx35pdk.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
imx53-m53evk.cfg
ftdi/board: Add support for DENX M53EVK
2013-07-15 10:02:37 +00:00
imx53loco.cfg
target: Pull out the jtag_rtck from iMX5x files
2013-07-15 10:02:32 +00:00
insignal_arndale.cfg
tcl/board: Add Arndale config
2015-10-30 12:43:07 +00:00
kc705.cfg
kc705: digilent-jtag/kintex7/jtagspi board
2015-08-06 13:14:21 +01:00
keil_mcb1700.cfg
cfg: fix lpc17xx regression
2015-01-09 08:47:20 +00:00
keil_mcb2140.cfg
Move TCL script files -- Step 2 of 2:
2009-05-27 06:49:24 +00:00
kwikstik.cfg
cfg: Fix Kinetis kwikstik/kx config
2015-02-22 16:23:48 +00:00
la_fonera-fon2200.cfg
tcl/target|board: add config Atheros ar2315
2015-11-03 22:18:30 +00:00
linksys_nslu2.cfg
target.cfg: remove "-work-area-virt 0"
2009-11-08 08:52:40 -08:00
linksys-wrt54gl.cfg
tcl/board: add Linksys WRT54GL v1.1 board config
2014-01-08 22:18:25 +00:00
lisa-l.cfg
config: do not use deprecated stm32.cfg
2011-11-17 17:30:03 +00:00
logicpd_imx27.cfg
TCL SCRIPTS: fix command name
2010-04-15 19:10:36 +02:00
lpc1850_spifi_generic.cfg
Generic LPC1850 board w/ SPIFI flash.
2012-11-06 14:34:16 +00:00
lpc4350_spifi_generic.cfg
lpc4350_spifi_generic: Clean up work area size
2015-11-03 22:09:17 +00:00
lubbock.cfg
TCL scripts: replace "puts" with "echo"
2010-11-09 08:12:51 +01:00
mbed-lpc11u24.cfg
cfg: refactor lpc1xxx targets onto one base config
2014-09-08 23:05:08 +00:00
mbed-lpc1768.cfg
cfg: fix lpc17xx regression
2015-01-09 08:47:20 +00:00
mcb1700.cfg
cfg: fix lpc17xx regression
2015-01-09 08:47:20 +00:00
microchip_explorer16.cfg
config scripts: remove useless reference to OpenOCD docs
2010-08-11 10:53:54 +02:00
mini2440.cfg
target config files: Fix whitespace issues.
2011-11-07 16:16:33 +00:00
mini6410.cfg
Board definition for mini6410/tiny6410 (ARM1176)
2011-05-29 23:42:09 +02:00
nds32_xc5.cfg
nds32: add new target type nds32_v2, nds32_v3, nds32_v3m
2013-06-05 19:27:35 +00:00
netgear-dg834v3.cfg
tcl/netgear-dg834v3.cfg: add to easy firmware recovery list
2014-01-08 22:18:39 +00:00
netgear-wg102.cfg
tcl/target|board: add config Atheros ar2313
2015-11-03 22:18:27 +00:00
nordic_nrf51822_mkit.cfg
tcl/board: Add board configuration for nRF51822-mKIT
2014-08-11 22:37:11 +00:00
numato_opsis.cfg
tcl: Adding the Numato Opsis board.
2015-10-21 09:11:13 +01:00
nxp_lpc-link2.cfg
tcl/board: Add LPC-Link2 config
2015-11-05 22:26:31 +00:00
olimex_LPC2378STK.cfg
Move TCL script files -- Step 2 of 2:
2009-05-27 06:49:24 +00:00
olimex_lpc_h2148.cfg
Move TCL script files -- Step 2 of 2:
2009-05-27 06:49:24 +00:00
olimex_sam7_ex256.cfg
Move TCL script files -- Step 2 of 2:
2009-05-27 06:49:24 +00:00
olimex_sam7_la2.cfg
target & board: AT91SAM7A2 and Olimex SAM7-LA2
2015-03-09 06:25:03 +00:00
olimex_sam9_l9260.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
olimex_stm32_h103.cfg
cfg: update scripts to use new stm32 driver names
2011-07-28 11:45:09 +01:00
olimex_stm32_h107.cfg
Split olimex_stm32_h107.cfg.
2012-04-20 15:33:24 +00:00
olimex_stm32_p107.cfg
Split olimex_stm32_h107.cfg.
2012-04-20 15:33:24 +00:00
omap2420_h4.cfg
board configs -- unique names for flash chips
2010-01-20 10:46:53 -08:00
open-bldc.cfg
Added Open-BLDC board config file.
2009-12-29 12:41:43 +01:00
openrd.cfg
tcl/board: fix all the remaining boards that were sourcing ft2232 configs
2014-08-02 09:04:19 +00:00
or1k_generic.cfg
openrisc: add support for JTAG Serial Port
2014-06-22 08:39:08 +00:00
osk5912.cfg
board configs -- unique names for flash chips
2010-01-20 10:46:53 -08:00
phone_se_j100i.cfg
board: Add Sony Ericsson J100I Phone
2012-05-25 12:06:41 +00:00
phytec_lpc3250.cfg
rename jtag_nsrst_delay as adapter_nsrst_delay
2010-03-15 08:41:30 -07:00
pic-p32mx.cfg
PIC32: add Microchip Explorer16 cfg
2010-03-16 10:10:20 +00:00
pipistrello.cfg
pipistrello: ftdi-jtag/spartan6/jtagspi board
2015-08-06 13:14:13 +01:00
propox_mmnet1001.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
pxa255_sst.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
quark_x10xx_board.cfg
quark_x10xx: add new target quark_x10xx
2014-02-11 13:07:29 +00:00
redbee.cfg
Fix redbee config files
2011-08-24 11:13:26 +02:00
rsc-w910.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
sheevaplug.cfg
tcl/board/sheevaplug: add adapter_khz setting
2014-09-15 08:20:05 +00:00
smdk6410.cfg
SMDK6410 is not target, move file to board
2011-05-29 20:05:01 +02:00
spansion_sk-fm4-176l-s6e2cc.cfg
fm4: Split out S6E2CC family config
2015-10-30 12:51:37 +00:00
spansion_sk-fm4-u120-9b560.cfg
tcl/board: Add Spansion SK-FM4-U120-9B560 config
2015-10-30 13:07:40 +00:00
spear300evb_mod.cfg
TCL: Add board file for EVALSPEAr300
2011-11-21 22:09:09 +00:00
spear300evb.cfg
TCL: Add board file for EVALSPEAr300
2011-11-21 22:09:09 +00:00
spear310evb20_mod.cfg
TCL/SPEAr: Add reference to ST Application Note
2011-11-21 22:03:17 +00:00
spear310evb20.cfg
TCL/SPEAr: Join two initialization files.
2011-11-21 22:07:19 +00:00
spear320cpu_mod.cfg
TCL/SPEAr: fix name of included file
2011-11-22 21:02:55 +00:00
spear320cpu.cfg
TCL/SPEAr: default one DDR chip
2011-12-06 21:06:15 +00:00
st_nucleo_f0.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
st_nucleo_f3.cfg
Provide genuine F3 nucleo config and source it for STM32F334 Discovery board.
2015-02-22 17:59:55 +00:00
st_nucleo_f4.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
st_nucleo_f103rb.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
st_nucleo_l1.cfg
tcl/board: Add ST NUCLEO L152RE configuration
2015-01-26 20:55:03 +00:00
steval_pcc010.cfg
Add definition for the STEVAL-PCC010 board with the STM32F207
2011-09-09 10:29:11 +02:00
stm32f0discovery.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32f3discovery.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32f4discovery.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32f7discovery.cfg
Add config files for STM32F7-DISCO and STM327[4|5]6G-EVAL.
2015-11-12 15:03:18 +00:00
stm32f334discovery.cfg
Provide genuine F3 nucleo config and source it for STM32F334 Discovery board.
2015-02-22 17:59:55 +00:00
stm32f429discovery.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32f469discovery.cfg
tcl: add STM32F469 discovery board config
2015-11-03 21:38:02 +00:00
stm32l0discovery.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32l4discovery.cfg
stm32l4: Add cpu and stm32l4discovery board configuration.
2015-11-12 20:21:06 +00:00
stm32ldiscovery.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32vldiscovery.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm327x6g_eval.cfg
Add config files for STM32F7-DISCO and STM327[4|5]6G-EVAL.
2015-11-12 15:03:18 +00:00
stm3210b_eval.cfg
cfg: update scripts to use new stm32 driver names
2011-07-28 11:45:09 +01:00
stm3210c_eval.cfg
cfg: update scripts to use new stm32 driver names
2011-07-28 11:45:09 +01:00
stm3210e_eval.cfg
cfg: update scripts to use new stm32 driver names
2011-07-28 11:45:09 +01:00
stm3220g_eval_stlink.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm3220g_eval.cfg
stm3220g_eval.cfg: fix CHIPNAME.
2011-10-25 20:08:58 +00:00
stm3241g_eval_stlink.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm3241g_eval.cfg
cfg: add STM32F4x and STM3241G-EVAL config files
2012-03-30 16:02:14 +00:00
stm32100b_eval.cfg
cfg: update scripts to use new stm32 driver names
2011-07-28 11:45:09 +01:00
stm32429i_eval_stlink.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32429i_eval.cfg
tcl/board: add STM32429I-EVAL and STM32439I-EVAL dev boards from ST.
2014-07-10 21:19:35 +00:00
stm32439i_eval_stlink.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm32439i_eval.cfg
tcl/board: add STM32429I-EVAL and STM32439I-EVAL dev boards from ST.
2014-07-10 21:19:35 +00:00
stm320518_eval_stlink.cfg
cfg: add srst_nogate to the supported targets, remove from board configs
2015-01-26 20:54:51 +00:00
stm320518_eval.cfg
cfg: add stm32 cmsis-dap compliant config
2014-01-09 15:22:42 +00:00
str910-eval.cfg
target config files: Fix whitespace issues.
2011-11-07 16:16:33 +00:00
telo.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
ti_am43xx_evm.cfg
board: ti_am43xx_evm: remove xds100v2 interface
2015-04-16 20:24:37 +01:00
ti_am335xevm.cfg
board: Add TI AM335x Evaluation Module
2012-07-19 18:48:06 +00:00
ti_am437x_idk.cfg
board: ti_am437x_idk: default to 1000kHz
2015-11-13 06:59:12 +00:00
ti_beagleboard_xm.cfg
AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.
2010-09-20 09:17:28 +02:00
ti_beagleboard.cfg
Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.
2009-09-04 08:27:08 +00:00
ti_beaglebone.cfg
Revert "board: don't hardcode interface for ti_beaglebone"
2015-11-04 12:19:55 +00:00
ti_blaze.cfg
omap4430: add Blaze config
2011-03-13 14:59:39 +01:00
ti_pandaboard_es.cfg
pandaboard: add initial TCL support for pandaboard-es
2012-04-18 20:32:08 +00:00
ti_pandaboard.cfg
TCL configs for OMAP4430 and Pandaboard
2011-01-31 08:57:50 +01:00
ti_tmdx570ls20susb.cfg
TI TMS570 USB Kit board config
2015-04-24 14:55:16 +01:00
ti_tmdx570ls31usb.cfg
add TI TMS570 support scripts
2013-11-06 13:06:41 +00:00
ti-cc3200-launchxl.cfg
cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPad
2015-02-22 19:00:34 +00:00
topas910.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
topasa900.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
tp-link_tl-mr3020.cfg
tcl: replace $TARGETNAME with $_TARGETNAME
2015-08-06 13:07:49 +01:00
twr-k60f120m.cfg
tcl/board/twr-k60f120m: remove useless flash bank 0 definition
2015-03-25 20:48:11 +00:00
twr-k60n512.cfg
kinetis: update support for all program flash granularities
2012-06-26 11:53:37 +00:00
tx25_stk5.cfg
Support for KaRo TX25 CPU Module on a StarterkitV base board
2012-04-10 12:15:16 +00:00
tx27_stk5.cfg
Made BI-swap optional in mxc.
2011-12-23 09:39:48 +00:00
unknown_at91sam9260.cfg
TCL: fix non TCL comments
2010-12-18 21:04:22 +01:00
uptech_2410.cfg
uptech2410
2011-06-02 12:17:28 +02:00
verdex.cfg
Verdex: Add support for Gumstix Verdex boards.
2011-10-01 13:11:02 +02:00
voipac.cfg
Add Voipac PXA270 module support
2010-04-26 07:08:55 +02:00
voltcraft_dso-3062c.cfg
Initial config for the Voltcraft DSO-3062C.
2012-04-02 00:02:56 +00:00
x300t.cfg
TCL scripts: update to current "flash bank" syntax
2010-03-26 08:42:58 +01:00
xmc1100-boot-kit.cfg
tcl/board: Add Infineon XMC1100 Boot Kit config
2015-04-14 11:52:35 +01:00
xmc4200-application-kit-actuator.cfg
tcl/board: Add Infineon XMC4200 Application Kit config
2015-04-14 11:37:40 +01:00
xmc4500-application-kit-general.cfg
xmc4500-application-kit-general: Drop srst_nogate
2015-04-24 15:13:03 +01:00
xmc4500-application-kit-sdram.cfg
tcl/board: Add Infineon XMC4500 Application Kit configs
2015-04-14 11:36:58 +01:00
xmc4500-relax.cfg
tcl/board: Add Infineon XMC4500 Relax Kit config
2015-04-14 11:38:19 +01:00
xmc-2go.cfg
tcl/board: Add Infineon XMC 2Go config
2015-04-14 11:53:20 +01:00
xmos_xk-xac-xa8_arm.cfg
tcl/board: Add config for XMOS xCORE-XA Core Module ARM debugging
2015-10-30 12:40:40 +00:00
zy1000.cfg
target config files: Fix whitespace issues.
2011-11-07 16:16:33 +00:00