David Brownell 3ace333663 create tcl/board/dm365evm.cfg ...

This config is only lightly tested, and doesn't work well yet;
but it's a start.

 * Notably missing is PLL configuration, since each DaVinci
   does that just a bit differently; and thus DDR2 setup.

 * The SRST workaround needed for the goof in the CPLD's VHDL
   depends on at least the not-yet-merged patch letting ARM9
   (and ARM7) chips perform resets that don't use SRST.

So this isn't yet suitable for debugging U-Boot.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-27 12:16:55 -08:00

..

arm_evaluator7t.cfg

Remove annoying end-of-line whitespace from tcl/* files

2009-09-21 18:48:22 +00:00

at91eb40a.cfg

more tcl/{board,target} cleanup

2009-12-15 14:45:26 -08:00

at91rm9200-dk.cfg

Remove annoying end-of-line whitespace from tcl/* files

2009-09-21 18:48:22 +00:00

at91sam9g20-ek.cfg

more tcl/{board,target} cleanup

2009-12-15 14:45:26 -08:00

atmel_at91sam7s-ek.cfg

native line endings

2009-08-21 09:01:00 +00:00

atmel_at91sam9260-ek.cfg

fix syntax of mww phys.

2009-10-25 22:15:57 +01:00

atmel_sam3u_ek.cfg

target.cfg: (re)move some bogus reset_config lines

2009-11-10 09:25:26 -08:00

balloon3-cpu.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

crossbow_tech_imote2.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

csb337.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

csb732.cfg

Tcl and doc: update to match new 'arm mcr ...' etc

2009-12-01 01:10:19 -08:00

digi_connectcore_wi-9c.cfg

more tcl/{board,target} cleanup

2009-12-15 14:45:26 -08:00

dm355evm.cfg

Tcl and doc: update to match new 'arm mcr ...' etc

2009-12-01 01:10:19 -08:00

dm365evm.cfg

create tcl/board/dm365evm.cfg

2009-12-27 12:16:55 -08:00

dm6446evm.cfg

Add basic support for DM6446 EVM board.

2009-10-06 22:56:52 +00:00

eir.cfg

Remove annoying end-of-line whitespace from tcl/* files

2009-09-21 18:48:22 +00:00

ek-lm3s9b9x.cfg

David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so

2009-08-28 06:53:35 +00:00

ek-lm3s811.cfg

David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so

2009-08-28 06:53:35 +00:00

ek-lm3s1968.cfg

David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so

2009-08-28 06:53:35 +00:00

ek-lm3s3748.cfg

lm3748: use new Stellaris config file

2009-12-14 16:29:53 -08:00

hammer.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

hitex_lpc2929.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

hitex_stm32-performancestick.cfg

David Brownell <david-b@pacbell.net> Make the Hitex STM32-PerformanceStick board config behave better:

2009-06-22 17:32:17 +00:00

hitex_str9-comstick.cfg

more tcl/{board,target} cleanup

2009-12-15 14:45:26 -08:00

iar_str912_sk.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

imx27ads.cfg

Remove annoying end-of-line whitespace from tcl/* files

2009-09-21 18:48:22 +00:00

imx27lnst.cfg

Remove annoying end-of-line whitespace from tcl/* files

2009-09-21 18:48:22 +00:00

imx31pdk.cfg

iMX target config script's ported from Freescale BSP.

2009-10-14 11:04:44 +02:00

imx35pdk.cfg

iMX target config script's ported from Freescale BSP.

2009-10-14 11:04:44 +02:00

keil_mcb1700.cfg

Audrius Urmanavičius [didele.deze@gmail.com]:

2009-08-13 13:54:53 +00:00

keil_mcb2140.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

linksys_nslu2.cfg

target.cfg: remove "-work-area-virt 0"

2009-11-08 08:52:40 -08:00

logicpd_imx27.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

lubbock.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

mini2440.cfg

more tcl/{board,target} cleanup

2009-12-15 14:45:26 -08:00

olimex_LPC2378STK.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

olimex_lpc_h2148.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

olimex_sam7_ex256.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

olimex_sam9_l9260.cfg

Olimex SAM9-L9260 board configuration update.

2009-12-26 13:08:24 -08:00

olimex_stm32_h103.cfg

freddie_chopin@op.pl fix handling of workarea

2009-06-30 11:50:04 +00:00

omap2420_h4.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

openrd.cfg

Tcl and doc: update to match new 'arm mcr ...' etc

2009-12-01 01:10:19 -08:00

osk5912.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

pic-p32mx.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

propox_mmnet1001.cfg

Remove annoying end-of-line whitespace from tcl/* files

2009-09-21 18:48:22 +00:00

pxa255_sst.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

sheevaplug.cfg

Tcl and doc: update to match new 'arm mcr ...' etc

2009-12-01 01:10:19 -08:00

stm32f10x_128k_eval.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

stm3210e_eval.cfg

Move TCL script files -- Step 2 of 2:

2009-05-27 06:49:24 +00:00

str910-eval.cfg

more tcl/{board,target} cleanup

2009-12-15 14:45:26 -08:00

telo.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

ti_beagleboard.cfg

Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.

2009-09-04 08:27:08 +00:00

topas910.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

topasa900.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

unknown_at91sam9260.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

x300t.cfg

update 'flash bank' usage in scripts

2009-11-19 13:39:41 -08:00

zy1000.cfg

more tcl/{board,target} cleanup

2009-12-15 14:45:26 -08:00