R. Steve McKown d7646942f2 Support newer OSBDM firmware ...

OSBDM: add new VID:PID implemented in OSJTAG/OSBDM firmware somewhere
between versions 30.13 and 31.21.  PFLASH programming works with this
patch, tested on a Freescale Kinetis TWR-K20D72M using its onboard OSBDM
JTAG adapter.

Note: flash program testing required hacking kinetis_write() to force
longword programming, as the FTFL program section commands formulated by
kinetis_write() currently fail on this board's PK20DX256VLL7 processor.

Change-Id: Ib7b92ff2fe9ebf6158fb1489f554a19e96cd9651
Signed-off-by: R. Steve McKown <rsmckown@gmail.com>
Reviewed-on: http://openocd.zylin.com/1348
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

2013-04-21 07:27:31 +00:00

..

OpenULINK

doxygen: remove warnings

2012-04-10 12:12:39 +00:00

versaloon

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

amt_jtagaccel.c

jtag: only change state if necessary

2013-01-27 14:16:52 +00:00

arm-jtag-ew.c

jtag: only change state if necessary

2013-01-27 14:16:52 +00:00

at91rm9200.c

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

bitbang.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

bitbang.h

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

bitq.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

bitq.h

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

buspirate.c

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

driver.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

dummy.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

ep93xx.c

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

ft2232.c

ft2232: remove ft2232_large_scan memory leak

2013-04-17 09:50:31 +00:00

ftd2xx_common.h

build: fix broken ftd2xx bus blaster

2012-10-04 13:42:56 +00:00

ftdi.c

ftdi: incorrectly using output register for direction

2012-10-02 11:23:48 +00:00

gw16012.c

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

jlink.c

J-Link: Initialize .transports to suppress warning.

2012-06-26 13:56:12 +00:00

libusb0_common.c

jtag: add support for some probes that are mostly compatible with opendous

2013-03-13 12:55:42 +00:00

libusb0_common.h

jtag: add support for some probes that are mostly compatible with opendous

2013-03-13 12:55:42 +00:00

libusb1_common.c

libusb: disable debug messages by default

2013-04-17 09:49:45 +00:00

libusb1_common.h

jtag: add support for some probes that are mostly compatible with opendous

2013-03-13 12:55:42 +00:00

libusb_common.h

libusb-1.0 support

2011-11-18 17:00:58 +00:00

Makefile.am

icdi: add TI icdi interface

2012-12-23 21:46:20 +00:00

Makefile.rlink

move jtag drivers to src/jtag/drivers

2009-12-02 23:27:09 -08:00

minidriver_imp.h

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

mpsse.c

speed up ftdi by reorder to out-in

2013-03-06 19:03:37 +00:00

mpsse.h

MPSSE: Add FT232H to supported chips

2012-07-17 04:59:56 +00:00

opendous.c

jtag: add support for some probes that are mostly compatible with opendous

2013-03-13 12:55:42 +00:00

osbdm.c

Support newer OSBDM firmware

2013-04-21 07:27:31 +00:00

parport.c

parport: fix parport_toggling_time regression

2013-04-17 09:51:59 +00:00

presto.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

remote_bitbang.c

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

rlink_call.m4

move jtag drivers to src/jtag/drivers

2009-12-02 23:27:09 -08:00

rlink_dtc_cmd.h

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

rlink_ep1_cmd.h

move jtag drivers to src/jtag/drivers

2009-12-02 23:27:09 -08:00

rlink_init.m4

move jtag drivers to src/jtag/drivers

2009-12-02 23:27:09 -08:00

rlink_speed_table.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

rlink_st7.h

move jtag drivers to src/jtag/drivers

2009-12-02 23:27:09 -08:00

rlink.c

rlink: Fix DTC command timeout

2012-10-08 20:32:20 +00:00

rlink.h

build: add helper/types.h to config.h

2012-05-21 16:15:26 +00:00

stlink_usb.c

stlink: fix connect under reset issues

2013-04-17 09:52:25 +00:00

sysfsgpio.c

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

ti_icdi_usb.c

ti_icdi: add icdi_usb_query result check

2013-03-31 09:04:35 +00:00

ulink.c

jtag: fix clang ulink memory leaks

2012-08-29 06:25:19 +00:00

usb_blaster.c

jtag: usb_blaster: fix allocation of usb_blaster_device_desc

2013-03-13 12:54:46 +00:00

usb_common.c

build: cleanup src/jtag/drivers directory

2012-02-06 10:59:07 +00:00

usb_common.h

build: add helper/types.h to config.h

2012-05-21 16:15:26 +00:00

usbprog.c

jtag_interface: .speed can be NULL when not needed

2013-02-08 22:33:19 +00:00

vsllink.c

Fix buffer overflow in versaloon interface

2013-02-25 11:59:17 +00:00