d9ba56c295
Rename cortex_a8 target to use a more correct cortex_a name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1130 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
52 lines
1.3 KiB
INI
52 lines
1.3 KiB
INI
# Freescale i.MX53
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME imx53
|
|
}
|
|
|
|
# CoreSight Debug Access Port
|
|
if { [info exists DAP_TAPID] } {
|
|
set _DAP_TAPID $DAP_TAPID
|
|
} else {
|
|
set _DAP_TAPID 0x1ba00477
|
|
}
|
|
|
|
jtag newtap $_CHIPNAME DAP -irlen 4 -ircapture 0x1 -irmask 0xf \
|
|
-expected-id $_DAP_TAPID
|
|
|
|
# SDMA / no IDCODE
|
|
jtag newtap $_CHIPNAME SDMA -irlen 4 -ircapture 0x0 -irmask 0xf
|
|
|
|
# SJC
|
|
if { [info exists SJC_TAPID] } {
|
|
set _SJC_TAPID SJC_TAPID
|
|
} else {
|
|
set _SJC_TAPID 0x0190d01d
|
|
}
|
|
|
|
jtag newtap $_CHIPNAME SJC -irlen 5 -ircapture 0x1 -irmask 0x1f \
|
|
-expected-id $_SJC_TAPID -ignore-version
|
|
|
|
# GDB target: Cortex-A8, using DAP
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.DAP
|
|
|
|
# some TCK tycles are required to activate the DEBUG power domain
|
|
jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
|
|
|
|
# have the DAP "always" be active
|
|
jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
|
|
|
|
proc imx53_dbginit {target} {
|
|
# General Cortex A8 debug initialisation
|
|
cortex_a dbginit
|
|
}
|
|
|
|
# Slow speed to be sure it will work
|
|
jtag_rclk 1000
|
|
$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
|
|
|
|
$_TARGETNAME configure -event reset-assert-post "imx53_dbginit $_TARGETNAME"
|