oharboe e6dac739cf - the jtag chain is examined and validated after GDB & telnet servers ...

are up and running. The examination and validation is actually
 "optional" from the point of view of GDB + telnet servers.
 Multiple targets should work fine with this.
- jtag_speed is dropped(divisor is increased), if jtag examination and
 validation fails.
- the chain is validated 10x to catch the worst jtag_speed offences
- added LOG_SILENT that can be used to shut up log. Feeble
 ersatz for try+catch.
- GDB register packets are now always replied in order to make sure
 that GDB connect works. If the target is not halted, then these
 packets contain dummy values.



git-svn-id: svn://svn.berlios.de/openocd/trunk@483 b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-10 14:07:28 +00:00

..

event

minor corrections for target scripts.

2008-03-07 11:42:03 +00:00

target

- add stm32 target script

2008-03-09 09:28:12 +00:00

xscale

- added svn props

2008-02-28 10:07:54 +00:00

algorithm.c

- added patch for new flash functionality like:

2007-12-18 21:20:28 +00:00

algorithm.h

- prepare OpenOCD for branching, created ./trunk/

2006-06-02 10:36:31 +00:00

arm7_9_common.c

- Improves error handling upon GDB connect

2008-03-07 21:49:16 +00:00

arm7_9_common.h

- fixed target->type->poll() return value

2008-02-24 18:52:45 +00:00

arm7tdmi.c

I fixed all the targets even though

2008-03-03 15:58:17 +00:00

arm7tdmi.h

- fix incorrect parsing of whitespace in command.c (thanks to Magnus Lundin)

2007-01-22 14:47:00 +00:00

arm9tdmi.c

I fixed all the targets even though

2008-03-03 15:58:17 +00:00

arm9tdmi.h

- add support for Marvell Feroceon (thanks to Nicolas Pitre for this patch)

2008-02-21 11:43:04 +00:00

arm11_dbgtap.c

Michael Bruck:

2008-03-06 12:01:52 +00:00

arm11.c

- the jtag chain is examined and validated after GDB & telnet servers

2008-03-10 14:07:28 +00:00

arm11.h

Michael Bruck - fix warnings.

2008-03-04 08:40:33 +00:00

arm720t.c

- Improves error handling upon GDB connect

2008-03-07 21:49:16 +00:00

arm720t.h

- added mingw elf patches from Vincent Palatin

2007-06-16 14:45:55 +00:00

arm920t.c

- Improves error handling upon GDB connect

2008-03-07 21:49:16 +00:00

arm920t.h

- endianess fixes everywhere but in the flash code. flashing might still be broken on big-endian targets and/or hosts

2006-08-31 12:41:49 +00:00

arm926ejs.c

- Improves error handling upon GDB connect

2008-03-07 21:49:16 +00:00

arm926ejs.h

- fixed target->type->poll() return value

2008-02-24 18:52:45 +00:00

arm966e.c

I fixed all the targets even though

2008-03-03 15:58:17 +00:00

arm966e.h

- cleaned up str7, str9 and stm32 flash drivers

2007-10-08 13:12:39 +00:00

arm_disassembler.c

- ST STM32x cortex support added

2007-06-24 15:04:07 +00:00

arm_disassembler.h

- added manpage for OpenOCD (thanks to Uwe Hermann)

2007-06-14 09:47:00 +00:00

arm_jtag.c

added an #error in case anybody tries to compile that broken code.

2008-02-29 21:51:17 +00:00

arm_jtag.h

- added patch "remove error handler as planned"

2008-01-20 13:52:06 +00:00

arm_simulator.c

- removed warnings "xxxxx" might be used uninitialized in this function (arm_simulator.c)

2008-03-01 19:13:05 +00:00

arm_simulator.h

- fixed endianness helper macros (thanks to obilix and wiml for finding and fixing this bug)

2007-06-28 10:32:58 +00:00

armv4_5_cache.c

- Added support for native MinGW builds (thanks to Spencer Oliver and Michael Fischer) - you still need to install GiveIO (not part of OpenOCD)

2006-07-17 14:13:27 +00:00

armv4_5_cache.h

- endianess fixes everywhere but in the flash code. flashing might still be broken on big-endian targets and/or hosts

2006-08-31 12:41:49 +00:00

armv4_5_mmu.c

- Fixed bug in pathmove for XScale

2008-02-19 19:26:17 +00:00

armv4_5_mmu.h

- endianess fixes everywhere but in the flash code. flashing might still be broken on big-endian targets and/or hosts

2006-08-31 12:41:49 +00:00

armv4_5.c

- the jtag chain is examined and validated after GDB & telnet servers

2008-03-10 14:07:28 +00:00

armv4_5.h

- fixed target->type->poll() return value

2008-02-24 18:52:45 +00:00

armv7m.c

- the jtag chain is examined and validated after GDB & telnet servers

2008-03-10 14:07:28 +00:00

armv7m.h

Uwe Hermann tightned up comments, etc. to follow OpenOCD policy

2008-03-02 08:39:02 +00:00

breakpoints.c

- flash autoerase <on|off> cmd added, default is off - flash banks are calculated and erased prior to write (flash write_image only)

2007-10-01 08:31:30 +00:00

breakpoints.h

- prepare OpenOCD for branching, created ./trunk/

2006-06-02 10:36:31 +00:00

cortex_m3.c

- Improves error handling upon GDB connect

2008-03-07 21:49:16 +00:00

cortex_m3.h

Uwe Hermann tightned up comments, etc. to follow OpenOCD policy

2008-03-02 08:39:02 +00:00

cortex_swjdp.c

Uwe Hermann tightned up comments, etc. to follow OpenOCD policy

2008-03-02 08:39:02 +00:00

cortex_swjdp.h

Uwe Hermann tightned up comments, etc. to follow OpenOCD policy

2008-03-02 08:39:02 +00:00

embeddedice.c

removed excessive debug output. Perhaps a debug_level 4 should be introduced? Hopefully it can be avoided as this was the only case where debug output was going through the roof.

2008-03-07 08:07:07 +00:00

embeddedice.h

- This speeds up dcc arm7_9 bulk write a little bit and exercises the jtag_add_dr_out() codepath

2008-03-05 19:29:41 +00:00

etb.c

- convert all files to unix line-ending

2008-02-25 17:48:04 +00:00

etb.h

- convert all files to unix line-ending

2008-02-25 17:48:04 +00:00

etm_dummy.c

- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible)

2007-07-15 11:19:33 +00:00

etm_dummy.h

- convert all files to unix line-ending

2008-02-25 17:48:04 +00:00

etm.c

Michael Bruck: fixed warnings

2008-03-07 16:18:56 +00:00

etm.h

- convert all files to unix line-ending

2008-02-25 17:48:04 +00:00

feroceon.c

I fixed all the targets even though

2008-03-03 15:58:17 +00:00

image.c

- fix cross endian ELF loading

2008-03-07 16:51:37 +00:00

image.h

- image.c and fileio.c now uses logging to propagate error strings.

2008-02-29 11:42:37 +00:00

Makefile.am

added stm32.cfg to install list

2008-03-10 10:20:26 +00:00

oocd_trace.c

- renamed M5960 USB JTAG to "flyswatter"

2007-08-10 19:44:06 +00:00

oocd_trace.h

- convert all files to unix line-ending

2008-02-25 17:48:04 +00:00

register.c

- str9x flash support (Thanks to Spencer Oliver)

2006-09-28 10:41:43 +00:00

register.h

- str9x flash support (Thanks to Spencer Oliver)

2006-09-28 10:41:43 +00:00

target_request.c

Summary: passing of variable argument list reduced, strings sent to logging are now formatted just once - more efficient.

2008-02-29 11:16:38 +00:00

target_request.h

Uwe Hermann:

2008-02-29 12:37:45 +00:00

target.c

- Fixed various error handling when looking for memory leaks

2008-03-10 12:11:07 +00:00

target.h

- the jtag chain is examined and validated after GDB & telnet servers

2008-03-10 14:07:28 +00:00

trace.c

- added patch "remove error handler as planned"

2008-01-20 13:52:06 +00:00

trace.h

- add verify_image command

2007-10-22 08:44:34 +00:00

xscale.c

- Improves error handling upon GDB connect

2008-03-07 21:49:16 +00:00

xscale.h

- added "xscale fast_memory_access" which speeds up memory

2008-02-24 21:54:09 +00:00