auracaster/sw_openocd
3
0
Fork 0
forked from auracaster/openocd
Code Pull Requests Activity

jtag/adapter: add command 'adapter serial'

Browse Source 
Several adapter define their own command to specify the USB serial
number or serial string to be used during USB search.

Define a general command 'adapter serial' to be proposed as
replacement of the driver specific ones.
No driver is changed so far to use it.

Change-Id: I7631687a4163ccc63a9bdf3ad1fcb300fc483d3a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6647
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
This commit is contained in:
Antonio Borneo
2021-10-07 19:27:31 +02:00
parent f66a16c4a0
commit 0343ae7cc7
3 changed files with 35 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
doc/openocd.texi
View File

@@ -2367,6 +2367,14 @@ The USB bus topology can be queried with the command @emph{lsusb -t} or @emph{dm
This command is only available if your libusb1 is at least version 1.0.16.
@end deffn
@deffn {Config Command} {adapter serial} serial_string
Specifies the @var{serial_string} of the adapter to use.
If this command is not specified, serial strings are not checked.
No adapter uses this command, so far.
The following adapters have their own command to specify the serial string:
cmsis_dap, ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110.
@end deffn
@section Interface Drivers
Each of the interface drivers listed here must be explicitly