auracaster/sw_openocd
3
0
Fork 0
forked from auracaster/openocd
Code Pull Requests Activity

Remove remaining references to FTD2XX driver

Browse Source 
This includes a USB blaster configuration that only worked with that
low-level access and some obsolete build-tests.

Change-Id: I53d27cbf782ebbd131b1af25e358adf35f2b4500
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6660
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This commit is contained in:
Andreas Fritiofson
2021-10-12 08:28:34 +02:00
committed by Antonio Borneo
parent 6fef2eca38
commit 4afd8852bb
21 changed files with 3 additions and 1825 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
doc/openocd.texi
View File

@@ -2459,7 +2459,7 @@ This driver is for adapters using the MPSSE (Multi-Protocol Synchronous Serial
Engine) mode built into many FTDI chips, such as the FT2232, FT4232 and FT232H.
The driver is using libusb-1.0 in asynchronous mode to talk to the FTDI device,
bypassing intermediate libraries like libftdi or D2XX.
bypassing intermediate libraries like libftdi.
Support for new FTDI based adapters can be added completely through
configuration files, without the need to patch and rebuild OpenOCD.
@@ -2728,13 +2728,6 @@ USB JTAG/USB-Blaster compatibles over one of the userspace libraries
for FTDI chips. These interfaces have several commands, used to
configure the driver before initializing the JTAG scan chain:
@deffn {Config Command} {usb_blaster device_desc} description
Provides the USB device description (the @emph{iProduct string})
of the FTDI FT245 device. If not
specified, the FTDI default value is used. This setting is only valid
if compiled with FTD2XX support.
@end deffn
@deffn {Config Command} {usb_blaster vid_pid} vid pid
The vendor ID and product ID of the FTDI FT245 device. If not specified,
default values are used.