auracaster/sw_openocd
3
0
Fork 0
forked from auracaster/openocd
Code Pull Requests Activity

flash: nor: ath79: remove base calculation

Browse Source 
Currently it is impossible to flash ELF with correct offsets. The reason
is a bogus offset calculation extracted from base.
Since any other spi drivers do not care about base, do the same for
ath79 as well.

Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4821
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This commit is contained in:
Oleksij Rempel
2018-12-26 12:47:11 +01:00
committed by Tomas Vanek
parent 08e64a828c
commit 8f777bc1a6
6 changed files with 6 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
src/flash/nor/ath79.c
View File

@@ -653,13 +653,6 @@ static int ath79_write(struct flash_bank *bank, const uint8_t *buffer,
LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32,
__func__, offset, count);
if (offset < bank->base || offset >= bank->base + bank->size) {
LOG_ERROR("Start address out of range");
return ERROR_FAIL;
}
offset -= bank->base;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
@@ -729,13 +722,6 @@ static int ath79_read(struct flash_bank *bank, uint8_t *buffer,
LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32,
__func__, offset, count);
if (offset < bank->base || offset >= bank->base + bank->size) {
LOG_ERROR("Start address out of range");
return ERROR_FAIL;
}
offset -= bank->base;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;