auracaster/sw_openocd
3
0
Fork 0
forked from auracaster/openocd
Code Pull Requests Activity

jtag/drivers: Add GPIO extender configuration function to ANGIE driver

Browse Source 
Add GPIO extender initial configuration that is needed to configure
some important GPIOs and ensure that the dev board is ready to work.

Add i2c_write function that make a write transfer to any slave device.

Give a new Product ID to ANGIE to make it different than the non
programmed ANGIE.

Change-Id: I0a8dacb7fe218145b7d3ed1cb75f106ed6256714
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8072
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit is contained in:
Ahmed BOUDJELIDA
2023-12-11 14:39:57 +01:00
committed by Antonio Borneo
parent 868700e720
commit b50a8dbe41
5 changed files with 116 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
contrib/firmware/angie/c/src/usb.c
View File

@@ -65,17 +65,6 @@ __code struct usb_config_descriptor config_descriptor = {
.maxpower = 50 /* 100 mA */
};
__code struct usb_interface_association_descriptor interface_association_descriptor = {
.blength = sizeof(struct usb_interface_association_descriptor),
.bdescriptortype = DESCRIPTOR_TYPE_INTERFACE_ASSOCIATION,
.bfirstinterface = 0x01,
.binterfacecount = 0x02,
.bfunctionclass = 0x02,
.bfunctionsubclass = 0x00,
.bfunctionprotocol = 0x00,
.ifunction = 0x00
};
__code struct usb_interface_descriptor interface_descriptor00 = {
.blength = sizeof(struct usb_interface_descriptor),
.bdescriptortype = DESCRIPTOR_TYPE_INTERFACE,