auracaster/sw_openocd
3
0
Fork 0
forked from auracaster/openocd
Code Pull Requests Activity

finish removing deprecated/obsolete commands

Browse Source 
It's been about a year since these were deprecated and, in most
cases, removed.  There's no point in carrying that documentation,
or backwards compatibility for "jtag_device" and "jtag_speed",
around forever.  (Or a few remnants of obsolete code...)

Removed a few obsolete uses of "jtag_speed":

 - The Calao stuff hasn't worked since July 2008.  (Those Atmel
   targets need to work with a 32KHz core clock after reset until
   board-specific init-reset code sets up the PLL and enables a
   faster JTAg clock.)
 - Parport speed controls don't actually work (tops out at about
   1 MHz on typical HW).
 - In general, speed controls need to live in board.cfg files (or
   sometimes target.cfg files), not interface.cfg ...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This commit is contained in:
David Brownell
2009-11-09 13:16:32 -08:00
parent 9253ce9bae
commit d70d9634bf
13 changed files with 10 additions and 211 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
tcl/interface/calao-usb-a9260.cfg
View File

@@ -5,12 +5,7 @@
#
# See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg.
#
# Note: You must have an OpenOCD version where jtag_speed sets two values.
# trunk r606 contains the fix for this particular issue which can
# be seen if jtag_speed does not set two separate values.
#
jtag_speed 1200 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200