auracaster/sw_openocd
3
0
Fork 0
forked from auracaster/openocd
Code Pull Requests Activity

jtag/kitprog: switch to command 'adapter serial'

Browse Source 
The driver kitprog defines the command 'kitprog_serial' to specify
the serial string of the adapter.

Remove and deprecate the driver command, and use 'adapter serial'.

Change-Id: I844cb815af01137392b6d12e1b5972fc77ac092d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6652
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
This commit is contained in:
Antonio Borneo
2021-10-07 22:31:27 +02:00
parent b1afd3dba4
commit d7b2313b5a
4 changed files with 11 additions and 34 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
doc/openocd.texi
View File

@@ -2371,9 +2371,9 @@ This command is only available if your libusb1 is at least version 1.0.16.
Specifies the @var{serial_string} of the adapter to use.
If this command is not specified, serial strings are not checked.
Only the following adapter drivers use the serial string from this command:
cmsis_dap, ft232r, ftdi.
cmsis_dap, ft232r, ftdi, kitprog.
The following adapters have their own command to specify the serial string:
hla, jlink, kitprog, presto, st-link, vsllink, xds110.
hla, jlink, presto, st-link, vsllink, xds110.
@end deffn
@section Interface Drivers
@@ -2896,11 +2896,6 @@ Indicate that a PSoC acquisition sequence needs to be run during adapter init.
Please be aware that the acquisition sequence hard-resets the target.
@end deffn
@deffn {Config Command} {kitprog_serial} serial
Select a KitProg device by its @var{serial}. If left unspecified, the first
device detected by OpenOCD will be used.
@end deffn
@deffn {Command} {kitprog acquire_psoc}
Run a PSoC acquisition sequence immediately. Typically, this should not be used
outside of the target-specific configuration scripts since it hard-resets the