Move TCL script files -- Step 2 of 2:

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60

tcl/target/samsung_s3c6410.cfg

@@ -0,0 +1,49 @@
+# -*- tcl -*-
+# Target configuration for the Samsung s3c6410 system on chip
+# Tested on a SMDK6410
+# Processor       : ARM1176
+# Info:   JTAG device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0)
+# [Duane Ellis 27/nov/2008: Above 0x0032409d appears to be copy/paste from other places]
+# [and I do not believe it to be accurate, hence the 0xffffffff below]
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME s3c6410
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+  # this defaults to a bigendian
+   set  _ENDIAN little
+}
+
+if { [info exists BSTAPID ] } {
+   set _BSTAPID $BSTAPID
+} else {
+  # force an error till we get a good number
+   set _BSTAPID 0x2b900f0f
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x07b76f0f
+}
+
+#jtag scan chain
+
+# I think the "unknown" is the boundry scan tap
+jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0xe  -expected-id $_BSTAPID
+jtag newtap $_CHIPNAME cpu     -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm11 -endian $_ENDIAN  -chain-position $_TARGETNAME -variant arm1176
+
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+#reset configuration
+reset_config trst_and_srst