auracaster/sw_openocd
3
0
Fork 0
forked from auracaster/openocd
Code Pull Requests Activity

Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interface

Browse Source 
- write speed up to 150 kByte/s on STM32F469I-disco (due to
  SWD clock and USB connection), up to 1 MByte/s on Nucleo-F767ZI
  with external STLink-V3 or Nucleo-G474RE with two W25Q256FV in
  dual 4-line mode or STM32H73BI-Disco in octal mode
- tested with STM32L476G-disco (64MBit flash, 3-byte addr),
  STM32F412G-Disco, STM32F469I-Disco, STM32F746G-Disco, and
  STM32L476G-Disco (all 128Mbit flash, 3-byte addr),
  STM32F723E-Disco, STM32F769I-Disco (512Mbit flash, 4-byte addr)
  STM32L4R9I-Disco, STM32L4P5G-Disco (512MBit octo-flash, DTR, 4-byte addr)
  STM32H745I-Disco, STM32H747I-Disco (two 512MBit flash, 4-byte addr)
  STM32H73BI-Disco, STM32H735G-Disco (512MBit octo-flash, DTR, 4-byte addr)
- suitable cfg for Discovery boards included
- limited parsing of SFDP data if flash device not hardcoded
  (tested only in single/quad mode as most devices either don't
  support SFDP at all or have empty(!) SFDP memory)
- 'set' command for auto detection override (e. g. for EEPROMs)
- 'cmd' command for arbitrary SPI commands (reconfiguration, testing etc.)
- makefile for creation of binary loader files
- tcl/board/stm32f469discovery.cfg superseded by stm32f469i-disco.cfg
- tcl/board/stm32f7discovery.cfg removed as name is ambiguous
  (superseded by stm32f746g-disco.cfg vs. stm32f769i-disco.cfg)
- dual 4-line mode tested on Nucleo-F767ZI, Nucleo-H743ZI and Nucleo-H7A3ZI-Q
  with two W25Q256FV, and on Nucleo-L496ZP-P and Nucleo-L4R5ZI
  with two W25Q128FV, sample cfg files included and on STM32H745I-Disco,
  STM32H747I-Disco, STM32H750B-Disco
- read/verify/erase_check uses indirect read mode to work around silicon bug in
  H7, L4+ and MP1 memory mapped mode (last bytes not readable, accessing last
  bytes causes debug interface to hang)
- octospi supported only in single/dual 1-line, 2-line, 4-line
  and single 8-line modes, (not in hyper flash mode)

Requirements:
GPIOs must be initialized appropriately, and SPI flash chip be configured
appropriately (1-line ..., QPI, 4-byte addresses ...). This is board/chip
specific, cf. included cfg files. The driver infers most parameters from
current setting in CR, CCR, ... registers.

Change-Id: I54858fbbe8758c3a5fe58812e93f5f39514704f8
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-on: http://openocd.zylin.com/4321
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Christopher Head <chead@zaber.com>
This commit is contained in:
Andreas Bolsch
2016-12-21 10:35:58 +01:00
committed by Tomas Vanek
parent 475f42051e
commit e44539d66c
57 changed files with 6709 additions and 33 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
src/flash/nor/spi.h
View File

@@ -1,5 +1,5 @@
/***************************************************************************
* Copyright (C) 2018 by Andreas Bolsch *
* Copyright (C) 2018-2019 by Andreas Bolsch *
* andreas.bolsch@mni.thm.de *
* *
* Copyright (C) 2012 by George Harris *
@@ -29,7 +29,7 @@
/* data structure to maintain flash ids from different vendors */
struct flash_device {
char *name;
const char *name;
uint8_t read_cmd;
uint8_t qread_cmd;
uint8_t pprog_cmd;
@@ -87,6 +87,8 @@ extern const struct flash_device flash_devices[];
#define SPIFLASH_PAGE_PROGRAM 0x02 /* Page Program */
#define SPIFLASH_FAST_READ 0x0B /* Fast Read */
#define SPIFLASH_READ 0x03 /* Normal Read */
#define SPIFLASH_MASS_ERASE 0xC7 /* Mass Erase */
#define SPIFLASH_READ_SFDP 0x5A /* Read Serial Flash Discoverable Parameters */
#define SPIFLASH_DEF_PAGESIZE 256 /* default for non-page-oriented devices (FRAMs) */