Added another test build configuration

git-svn-id: svn://svn.berlios.de/openocd/trunk@1290 b42882b7-edfa-0310-969c-e2dbd0fdcd60

testing/build.test2/README.txt

@@ -0,0 +1,59 @@
+
+This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
+openocd test purposes on Cygwin. I have included it here so others
+might also make use of the same configuration that I use to develop
+Openocd.
+
+--Duane Ellis
+
+To make use of it do the following:
+
+(1)	Check out openocd in the standard way.
+
+For example - in cygwin, type this:
+
+    bash$  mkdir -p /home/duane/test
+    bash$  cd /home/duane/test
+    bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
+
+(2)	COPY this folder "right above" where you have OpenOCD.
+
+    bash$  cd /home/duane/test
+    bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.
+
+(3) OPTIONALLY
+
+    You might want to review the file "local.uses"
+    Change options and so forth at the top of the file.
+
+(4) 	Initially, you need to download some additional files.
+	These include "libftdi", "libconfuse", and the ftd2xx drivers.
+
+(5)	You also need to build the supporting libraries and install them
+	(They are installed "locally" only)
+
+	Type this command:
+
+    bash$ cd /home/duane/test
+
+    bash$ make initial.build
+
+    	  which:  (1) downloads files
+	  	  (2) builds the libs
+		  (3) builds OpenOCD
+
+(6)     As you hack upon OpenOCD... to rebuild OpenOCD...
+	
+    bash$ cd /home/duane/test
+
+    bash$ make remake
+
+    	  which: (1) re-bootstraps 
+	  	 (2) re-configures
+		 (3) re-builds
+		 (4) re-installs.
+   
+=======
+**END**
+=======
+