Commit 53b94fad58 ("binarybuffer: Fix str_to_buf() parsing
function") introduces the helper command_parse_str_to_buf() to
parse as number a string on TCL command-line.
The parameter 'radix' can specify the base (decimal, octal,
hexadecimal, or auto-detected).
TCL is supposed to use decimal numbers by default, while octal and
hexadecimal numbers must be prefixed respectively with '0' and
'0x' (or '0X').
This would require the helper to always run auto-detection of the
base, thus always set the 'radix' parameter to zero. This makes
the parameter useless.
Keeping the 'radix' parameter can open the door to future abuse of
TCL syntax, E.g. a command can require an octal value without the
mandatory TCL '0' prefix; the octal value cannot be the result of
TCL expression.
To prevent any future abuse of the 'radix' parameter, drop it.
Change-Id: I88855bd83b4e08e8fdcf86a2fa5ef3269dd4ad57
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8393
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: I364467b88f193f8387623a19e6994ef77899d117
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8414
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: Idcbbbbbea2705512201eb326c3e6cef110dbc674
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8413
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: Ie048b3d472f546fecb6733f17f9d0f17fda40187
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8404
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be modified
in following patches.
Change-Id: I83921d70e017095d63547e0bc9fe61779191d9d0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8403
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added FT4232HA varianet of FTDI's FT4232H which has a different bcd.
Also added default PID/VID for the FT4243HA to contrib/60-openocd.rules.
And added default PID/VIDs for FTDI's HP ICs to contrib/60-openocd.rules
as this wasn't done previously.
BugLink: https://sourceforge.net/p/openocd/tickets/410/
Change-Id: Ia84b566aa004332d3f7815a3d22ac37eee4f522a
Signed-off-by: Jonathan Forrest <jonyscathe@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8225
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function str_to_buf() was too benevolent and did
not perform sufficient error checking on the input
string being parsed. Especially:
- Invalid numbers were silently ignored.
- Out-of-range numbers were silently truncated.
The following commands that use str_to_buf()
were affected:
- reg (when writing a register value)
- set_reg
- jtag drscan
This pull request fixes that by:
- Rewriting str_to_buf() to add the missing checks.
- Adding function command_parse_str_to_buf() which can
be used in command handlers. It parses the input
numbers and provides user-readable error messages
in case of parsing errors.
Examples:
jtag drscan 10 huh10
- Old behavior: The string "huh10" is silently
converted to 10 and the command is then executed.
No warning error or warning is shown to the user.
- New behavior: Error message is shown:
"'huh10' is not a valid number"
reg pc 0x123456789
Assuming the "pc" is 32 bits wide:
- Old behavior: The register value is silently
truncated to 0x23456789 and the command is performed.
- New behavior: Error message is shown to the user:
"Number 0x123456789 exceeds 32 bits"
Change-Id: I079e19cd153aec853a3c2eb66953024b8542d0f4
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8315
Tested-by: jenkins
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'hla' with subcommands instead of individual
commands with 'hla_' prefix.
The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I612e3cc080d308735932aea0f11001428eadc570
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8335
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Changes affect the function remote_bitbang_fill_buf.
When read_socket returns 0, socket reached EOF and there is
no data to read. But if request was blocking, the caller
expected some data. Such situations should be treated as ERROR.
Change-Id: I02ed484e61fb776c1625f6e36ab14c85891939b2
Signed-off-by: Timur Golubovich <timur.golubovich@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8325
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove list of id codes for all families.
Maintain a list with id, bscan-length and check position
in the tcl config files for each family.
The Intel FPGA Driver option 'family' is not otional anymore.
Change-Id: I9a40a041069e84f6b4728f2cd715756a36759c89
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/8083
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
LOG_USER only outputs to user interfaces, but leaves no way to get the
FTDI inputs over the RPC interface. Switch to command_print so this
string goes to both logs and the RPC interface.
Change-Id: I99024194b6687b88d354ef278aa25f372c862c22
Signed-off-by: Mark Featherston <mark@embeddedts.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8294
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
It was noticed that the remote_bitbang protocol has a design issue:
SWD and sleep commands cannot be implemented at the same time, because
they overlap:
- SWD uses d,e,f,g for setting pin state
- sleep uses d,D for microsecond and millisecond sleep, respectively
This has previously been reported by Marek Vrbka, but it wasn't fixed.
This commit does the following to resolve the issue:
- Change the sleep commands to 'Z' for 1 ms, 'z' for 1 µs
- Document 'D' and 'd' as deprecated aliases
- Switch the remote_bitbang driver in OpenOCD to 'Z' and 'z'
Unfortunately that's a breaking change, because existing adapter-side
implementations of the protocol will have to implement the new commands
to keep working with future versions of OpenOCD. Fortunately, the
remote sleep commands haven't been part of an OpenOCD release yet,
which should limit the breakage somewhat.
Reported-by: Marek Vrbka <marek.vrbka@codasip.com>
Link: https://sourceforge.net/p/openocd/mailman/openocd-devel/thread/670d28d2-75a1-45ec-afe5-541415701d7a%40codasip.com/
Fixes: e8e09b1b5 ("remote_bitbang: add use_remote_sleep option to send delays to remote")
Change-Id: I04d2790a33bff9d47eb7f69b3275fd9a271625ae
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8191
Reviewed-by: David Ryskalczyk <david.rysk@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jeremy Herbert <jeremy.006@gmail.com>
Commit 290eac04b9 ("drivers/linuxgpiod: Migrate to adapter gpio
commands") introduced an incorrect check to determine if the
library libgpiod declares the line request flags:
GPIOD_LINE_REQUEST_FLAG_BIAS_DISABLE
GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_UP
GPIOD_LINE_REQUEST_FLAG_BIAS_PULL_DOWN
The names above are declared by the library inside an enum, thus
cannot be used by the C preprocessor in a #ifdef.
Determine in configure if the version of libgpiod provides the
line request flags for "bias" and define a C macro.
Use the new macro in the driver code.
Change-Id: Iaa452230f4753fce4c6e9daa254299cedb7cab7f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 290eac04b9 ("drivers/linuxgpiod: Migrate to adapter gpio commands")
Reviewed-on: https://review.openocd.org/c/openocd/+/8186
Tested-by: jenkins
Reviewed-by: Michael Heimpold <michaheimpold@gmail.com>
To simplify the ipdbg start/stop command and be able to
add additional commands in the future, we introduce the
concept of a hub which has to be created before a
ipdbg server can be started.
The hub was created on the fly in previous versions.
Change-Id: I55f317542d01a7324990b2cacd496a41fa5ff875
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7979
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The bitbang driver kept retrying a SWD command as long as
the debugged device had been responding by SWD WAIT.
If the DP stalled in WAIT permanently, OpenOCD hanged.
Check 0.5 sec timeout in WAIT retry loop.
While on it insert a short alive_sleep() if the command
is retried 20 or more times.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I744e56e21a5a2dc2c4494cc0d7bbcb4be14ddb23
Reviewed-on: https://review.openocd.org/c/openocd/+/8153
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Log SWD commands with not OK response but WAIT retries at debug level.
For commands responded OK and WAIT retries use debug io level
not to flood the log.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Idf658e82ed970061c155945df55d06908ed25e09
Reviewed-on: https://review.openocd.org/c/openocd/+/8152
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Allow logging at a changeable level.
Add an example of usage in ftdi driver.
Log SWD commands with not OK response at debug level (3).
For commands which responded OK use debug io level (4)
not to flood the log.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I67a472b293f7ed9ee84cadb7c081803e9eeb1ad0
Reviewed-on: https://review.openocd.org/c/openocd/+/8151
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Unify the error codes returned by adapter drivers in the case
of the received SWD ACK field differs from OK.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I29e478390b4b30408054a090ac6a7fac3415ae71
Reviewed-on: https://review.openocd.org/c/openocd/+/8137
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
When performing a command queue allocation larger than the default page
size of 1MiB any subsequent allocations will run into an integer under-
flow when checking for the remaining memory left in the current page.
Causing the function returning a pointer past the end of the buffer and
thus creating a buffer overflow.
This has been observed to cause some transfers to Efinix FPGAs to fail,
because another buffer can get corrupted in the process, causing its
respective free() to fail.
Change-Id: Ic5a0e1774e2dbd58f1a05127f14816c8251a7d9c
Signed-off-by: SydMontague <sydmontague@phoenix-staffel.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8126
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The OpenJTAG driver behaviour always forces a system reset on jtag_init.
The driver was incorrectly assuming that when execute_reset is called
with trst set to 1 - perform a software TAP reset, otherwise perform a
system reset when trst is 0.
The set_state call assumes the that OpenJTAG hardware will perform a
software TLR reset if the target state is TAP_RESET. This is not the
case: the published VHDL will simply find the shortest path to TLR and
not perform a fixed 5 cycle operation with TMS held high.
Fix the code to only perform system resets when srst is 1 in
execute_reset and to force a software TAP reset operation in set_state
when the target state is TAP_RESET.
Change-Id: I7e0f76f8491efefff1ccaeb4b1ae16e722d76df4
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8121
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Calculate exact size of response expected from OpenJTAG device so that
openjtag_buf_read_standard doesn't spend 5 retry cycles waiting for
data that isn't coming.
Change-Id: Icd010d1fa4453d6592a1f9aed93fb1f01e0a19da
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8101
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Commit ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as
COMMAND_HANDLER") breaks the option -event if it is the last of
the command line.
This can be tested, even without any device connected, through:
#> openocd -f board/ti_cc26x0_launchpad.cfg
wrong # args: should be "-event <event-name> <event-body>"
Fix the check on available arguments after -event.
Change-Id: Iec1522238f906d61a888a09a7685acd9ac6442a7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Lorenz Brun <lorenz@brun.one>
Fixes: ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as COMMAND_HANDLER")
Reviewed-on: https://review.openocd.org/c/openocd/+/8125
Tested-by: jenkins
Reviewed-by: Lorenz Brun <lorenz@brun.one>
LIBUSB_ERROR_INTERRUPTED can happen when (among other things) OpenOCD
process receives a signal like SIGHUP or SIGINT during a call to libusb.
Such situations are expected and should not be treated as an error - the
affected request should just be restarted.
Without this patch applied if a signal arrives during FTDI initialization
procedure we can easily end up (if JTAG speed is low) in situations like
https://review.openocd.org/c/openocd/+/4767. This happens because
fpsse_flush fails due to LIBUSB_ERROR_INTERRUPTED .
It should be noted that the current usage of mpsse_flush should be
revised since it seems that we don't always process error codes returned
by the function.
Change-Id: Ifa063ce828068f8d0371e1c2a864bb6174649848
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7769
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Previously, the gpio_num and chip_num members of adapter_gpio_config
were typed as 'int' and a sentinel value of -1 was used to denote
unconfigured values.
Now, these members are typed as 'unsigned int' to better reflect their
expected value range.
The sentinel value now maps to UINT_MAX as all adapters either define an
upper bound for these members or, in the case of bcm2835gpio, only
operate on a specific chip, in which case the value doesn't matter.
Format specifiers have been left as %d since, when configured, valid
values are within the positive range of 'int'. This allows unconfigured
values to display as a more readable value of -1 instead of UINT_MAX.
Change-Id: Ieb20e5327b2e2e443a8e43d8689cb29538a5c9c1
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8124
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Jlink driver floods the debug log by a message per one poll interval.
Avoid annoying messages, change their logging level to LOG_DEBUG_IO
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I84ea6aa9cdfd44b5985c5393519d1efb7de9530a
Reviewed-on: https://review.openocd.org/c/openocd/+/8116
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
This change implements the support for the ARM Debug Interface v6.
The DAP-level interface properly selects the DP Banks and AP address.
Sample ARM configuration DAP and JTAG scripts have been updated.
Change-Id: I7df87ef764bca587697c778810443649a7f46c2b
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8067
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Correct GPIO Extender configuration, after reconsideration,
we need to configure the IO extender 0x23 pins as all inputs.
Add more LOG_ERRORs to the code to better track bugs.
Re-organize angie_init function
Change-Id: I1fcf4919ba9ea95576803dd35cce7dafa26853b4
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8079
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang static analyzer warnings
"1st function call argument is an uninitialized value"
on the first libusb_free_transfer() parameter (lines 423, 424)
could turn into a real problem in a corner case:
If allocation of a libusb transfer struct fails, the pointers of not yet
allocated transfers remain uninitialized.
Use calloc() to zero whole struct cmsis_dap_backend_data.
Fixes: fd75e9e542 (jtag/drivers/cmsis_dap_bulk: use asynchronous libusb transfer)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I0e489757d82d10ed7416c5e8c215e1facc7f8093
Reviewed-on: https://review.openocd.org/c/openocd/+/8045
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag configure
- jtag cget
While there, add the missing .usage field.
Change-Id: I97ddc4898259ddb7fd2d057a997f33a6f4b0e2a8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8058
Tested-by: jenkins
Before this change, when we send an I2C Bulk data at the same
time while Jtag bitbanging functions execute, the microcontroller
puts JTAG bitbanging on wait and executes all I2C bitbanging
function, which causes problems like loss of Ack in DAP responses
and other errors.
With this commit, When I2C interruption occurs, it sets a variable
to true and continues JTAG bitbanging, when it finish it executes
the I2C bitbang.
Change-Id: Ia80bac21f8a259f4a1176b5346bf74ed0aa6e38b
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8074
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add GPIO extender initial configuration that is needed to configure
some important GPIOs and ensure that the dev board is ready to work.
Add i2c_write function that make a write transfer to any slave device.
Give a new Product ID to ANGIE to make it different than the non
programmed ANGIE.
Change-Id: I0a8dacb7fe218145b7d3ed1cb75f106ed6256714
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8072
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
remove angie_clear_queue function from executing before the
angie_execute_queued_commands function and making it at the
end of the reset function.
Change-Id: Id8a0664fbd5b8f9730545ce0f8f272ae0b0e7e78
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7990
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
