Just use the array of names we're given, ignoring indices.
The "reserved means don't use" patch missed that change.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
I'm suspecting this code can never have worked, since the
original commit (svn #335) in early 2008.
Fix is just copy/paste from another (working) function.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Unneeded exports cause confusion about the module interfaces.
Make most functions static, and fix some line-too-long issues.
Delete some now-obviously-unused code.
The forward decls are just code clutter; move their references
later, after the normal declarations. (Or vice versa.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Unneeded exports cause confusion about the module interfaces.
Only the Feroceon code builds on this, so only routines it
reuses should be public.. Make most remaining functions
static, and fix some of the line-too-long issues.
The forward decls are just code clutter; move their references
later, after the normal declarations. Turns out we don't need
even one forward declaration in this file.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The Hex parser uses a fixed number of sections. When the
number of sections in the file is greater than that, the
stack get corrupted and a CHECKSUM ERROR is detected
which is very confusing.
This checks the number of sections read, and increases
IMAGE_MAX_SECTIONS so it works on my file.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Only type 1 branch instruction has a condition code, not type 2.
Currently they're both tagged with ARM_B which doesn't allow for the
distinction.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
A Thumb BLX instruction is branching to ARM code, and therefore the
first 2 bits of the target address must be cleared.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Currently, OpenOCD is always caching the PC value without the T bit.
This means that assignment to the PC register must clear that bit and set
the processor state to Thumb when it is set. And when the PC register
value is transferred to another register or stored into memory then
the T bit must be restored.
Discussion: It is arguable if OpenOCd should have preserved the original
PC value which would have greatly simplified this code. The processor
state could then be obtained simply by getting at bit 0 of the PC. This
however would require special handling elsewhere instead since the T bit
is not always relevant (like when PC is used with ALU insns or as an index
with some addressing modes). It is unclear which way would be simpler in
the end.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Whenever an unconditional branch with the H bits set to 0b10 is met, the
offset must be combined with the offset from the following opcode and not
ignored like it is now.
A comment in evaluate_b_bl_blx_thumb() suggests that the Thumb2 decoder
would be a simpler solution. That might be true when single-stepping of
Thumb2 code is implemented. But for now this appears to be the simplest
solution to fix Thumb1 support.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Calling it first with every opcodes and then testing if the opcode
was indeed a branch instruction is wasteful and rather strange.
If ever thumb_pass_branch_condition() has side effects (say, like
printing a debugging traces) then the result would be garbage for most
Thumb instructions which have no condition code.
While at it, let's make the nearby code more readable by reducing some of
the redundant brace noise and reworking the error handling construct.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make the "dap info" output more comprehensible:
- Don't show CIDs unless they're incorrect (only four bits matter)
- For CoreSight parts, interpret the part type
- Interpret the part number
- Show all five PID bytes together
- Other minor cleanups
Also some whitespace fixes, and shrink a few overlong source lines.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Remove needless debug handler state.
- "handler_installed" became wrong as soon as the second TRST+SRST
reset was issued ... so the handler was never reloaded after the
reset removed it from the mini-icache.
This fixes the bug where subsequent resets fail on PXA255 (if the
first one even worked, which is uncommon). Other XScale chips
would have problems too; PXA270 seems to have, IXP425 maybe not.
- "handler_running" was never tested; it's pointless.
Plus a related bugfix: invalidate OpenOCD's ARM register cache on reset.
It was no more valid than the XScale's mini-icache. (Though ... such
invalidations might be better done in "SRST asserted" callbacks.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Bit 5 shouldn't be used. Remove all support for modifying it.
Matches the exception vector table, of course ... more than one
bootloader uses that non-vector to help distinguish valid boot
images from random garbage in flash.
The wrong variable (pc instead of r0) was used. Furthermore, someone
did cover this error by stupidly silencing the compiler warning that
occurred before a dummy void reference to r0 was added to the code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When dumping over 100 registers (as on most ARM9 + ETM cores),
aid readability by splitting them into logical groups.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The register names are perversely not documented as zero-indexed,
so rename them to match that convention. Also switch to lowercase
suffixes and infix numbering, matching ETB and EmbeddedICE usage.
Update docs to be a bit more accurate, especially regarding what
the "trigger" event can cause; and to split the issues into a few
more paragraphs, for clarity.
Make "configure" helptext point out that "oocd_trace" is prototype
hardware, not anything "real".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Passing "--std=gun99" is unfortunately not sufficient to make current
MinGW compilers conform with respect to checking printf format strings.
(The C runtime seems not to have problems.)
Fix by using a "gnu_printf" format specifier not "printf".
Generate a C struct with the data, and use that, instead of an
assembly language file. The assembly language causes issues on
Darwin and MS-Windows, which don't necessarily use GNU AS; or
if they do, don't necessarily use its ELF syntax.
It's also better in two other ways: fewer global symbols; and
the init-time size check gets optimized away at compile time.
(Unless it fails, in which case bigger chunks of the file vanish.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Based on some patches from <redirect.slash.nil@gmail.com>
for preliminary Win64 compilation. More such updates are
needed, but they need work. Compile tested on 64 and 32 bit
Linuxes, and Cygwin.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The LE check is obviously buggy (as easily triggered during some
testing), but I didn't audit the rest of the cases.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Resolve a "FIX" comment; yes that was superfluous given that the
JTAG core does that check by default. It was also buggy since it
wrote to a stack frame that went away before the write happened!!
Other fixes: remove pointless malloc(); zero-init scan_field_t
values wherever they appear; whitespace scrub; spelling fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
