"make dist" was broken because GNU Make was using a built-in rule
to try to build angie from angie.c . This is a limitation in Automake
when you add a whole subdir with the same name to EXTRA_DIST.
The Automake doc actually discourages adding whole subdirs.
Change-Id: I85ea4ecbd529b060c70f83bcfda7522e1730480d
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8600
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
No driver directly working with the USB hardware needs additional
time to complete the write op, they always return transfer complete
status immediately after submitting the transfer.
Although there is implemented correct waiting path in cmsis_dap_usb_write()
it was marked by error logs to catch any suspicious behaviour during
debugging of asynchronous libusb transfers.
However there are drivers which need waiting to finish write op:
at least usbipd-win, IP tunnelled USB driver, was reported
to flood the log with the related errors.
Change LOG_ERROR to LOG_DEBUG_IO in the code waiting to finish write op.
Reported-by: Quentis Ghyll <quentisgh@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Iedf2c96d851f22e694efaf13a2d6a2a408cee1ad
Reviewed-on: https://review.openocd.org/c/openocd/+/8640
Tested-by: jenkins
CMSIS-DAP bulk backend read op used two timeouts: transfer timeout
used in libusb_fill_bulk_transfer() and wait timeout used optionally
in libusb_handle_events_timeout_completed().
The real usage is limited to two cases only:
1) blocking read: the same timeout is used for both transfer
and wait
2) non-blocking read: transfer timeout is used in
libusb_fill_bulk_transfer(),
libusb_handle_events_timeout_completed() is called with zero timeout.
Use blocking flag as read op parameter to distinguish between
these two cases.
See also [1]
Link: [1] 8596: jtag: cmsis_dap: include helper/time_support.h | https://review.openocd.org/c/openocd/+/8596
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ia755f17dc72bb9ce8e02065fee6a064f8eec6661
Reviewed-on: https://review.openocd.org/c/openocd/+/8639
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
While at it, rework the log messages, for example by removing spaces
or punctuation marks at the end of the message.
Change-Id: I3dd4314d354b5628144f98325540926981778616
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8665
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add a target-related log function for user messages as it already
exists for other log levels.
Change-Id: I9076677d6451b900332583e748bab3f83df56d3b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8661
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Previously, Linux assigned gpiochip numbers sequentially depending on
when the chip driver was probed. As RP1 is on the end of a PCIe link, it
is probed later than the on-board chips (including expanders connected
over SPI/I2C). This meant that RP1's gpiochip assignment was at an
offset that could potentially change.
A downstream kernel patch now assigns fixed offsets for RP1 and the
onboard gpiochips. Query the device tree to get proper GPIO_CHIP index.
Change-Id: I759978d4b3021c815a7d9febb41961cd1d3d185c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8650
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
The RISC-V coprocessor is currently not supported. It is attached to the
DAP via AP#2 but the AP implementation is unknown.
The nRFL54L series uses resistive RAM (RRAM) as non-volatile memory
which can be programmed directly. Since it does not fit in the current
flash memory infrastructure of OpenOCD there is no NVM support so far.
Change-Id: I9934af4fd3bb8b7272954fc4b17638c7dabbbee0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8609
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The Dummy adapter is useful when developing generic JimTcl code.
Besides, the distributed BUGS file states that you should
try to reproduce any crashes with the Dummy adapter, so
it does not make sense that it is not enabled by default.
Change-Id: I145de06de4d2c0011619b1b941200b63e200db23
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8608
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
The command 'arm core_state' uses the enum in 'arm->core_state' as
an index in the table of strings to print the core state.
With [1] the enum has been extended with the new state for AArch64
but not the corresponding table of strings.
This causes an access after the limit of arm_state_strings[].
Rewrite the table using c99 array designators to better show the
link between the enum list and the table.
Add the function arm_core_state_string() to check for out-of-bound
values allover the file.
Change-Id: I06473c2c8088b38ee07118bcc9e49bc8eafbc6e2
Fixes: [1] 9cbfc9feb3 ("arm_dpm: Add new state ARM_STATE_AARCH64")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8594
Tested-by: jenkins
The log messages are very inconsistent across the code base. Add a
guideline for log messages to help improve consistency. The guideline is
based on the most commonly used style in the current code base.
Change-Id: I076d68abe588dd04b59580379e97b82d537def23
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8576
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
rtt_write_channel may write less data than requested,
default device buffer size for channel 0 is 16 bytes,
so currently anything larger than this is dropped.
This fix implements per connection buffer and uses the
connection->input_pending flag to retry writes.
Change-Id: I00c845fccb0248550ad0f0fd9cda7bac7976b92b
Signed-off-by: fanoush <fanoush@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8360
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
During the ./configure build stage, error './configure.gnu: line 1: -e:
command not found' can occur.
Problem: the -e flag with echo is not portable. While some shells support
it (e.g., Bash), others (e.g., POSIX /bin/sh on some systems) do not.
Solution: replacing echo -e with printf, since printf is POSIX-compliant
and works consistently across different shells.
Change-Id: I9efbba662599a61bbe1fc56a33dc1ee7ad58826c
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8653
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
https://review.openocd.org/c/openocd/+/8439 changed variable `words`
from uint8_t to unsigned int in sfdp.c but failed to update the
LOG_DEBUG line to reflect the new type. On macOS this caused:
src/flash/nor/sfdp.c:107:28: error: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Werror,-Wformat]
The formatting of the debug line has been updated to reflect the updated
type.
Change-Id: Ifc7ddb1279ab2603901c969d9c09af847f3a3caf
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8660
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I8707342c602cea735c5a423b37ebe40a3aafb137
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8578
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
List AC_ARG_ADAPTERS was missing a comma separating two of the elements.
Also verify that each adapter is set to either 'auto', 'yes' or 'no',
which should prevent such issues from going unnoticed in the future.
Change-Id: I0d407e03b1e5a3edc61d7dc93d5ffa70fe079b3c
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8534
Tested-by: jenkins
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The stlink driver, both in dapdirect and in HLA modes, pretends to
store locally the value of the adapter speed in order to use it
later-on during adapter initialization.
It doesn't work in dapdirect mode since the code to store locally
the value will not be executed until the adapter is already fully
initialized.
This cause an issue in dapdirect mode:
- due to the local value, still kept at -1, the adapter will be
initialized to the lowest clock speed (5 KHz on stlink v2 in SWD
mode);
- after the adapter initialization the framework will again set
the speed with the value requested by the user.
Some target, like nRF51822, only accepts JTAG/SWD speed in a
defined range of frequencies. The initial speed of 5 KHz used by
dapdirect can be out of range, making the target debug port not
working.
The adapter framework already stores the value of speed and makes
it available through adapter_get_speed_khz().
Drop struct hl_interface_param::initial_interface_speed.
Let the code to use adapter_get_speed_khz().
Change-Id: Ie11bf0234574f2a9180d3d3a16efb78e08dfcd86
Reported-by: Andrzej Sierżęga <asier70@gmail.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8574
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Tested-by: jenkins
Change the variable name to 'is_configure' to be compatible with the
coding style and use 'bool' as data type.
Change-Id: I8609f9807c8bd14eaf6c93acf63fd51b55c9bbbb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8573
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The functions:
- semihosting_opcode_to_str();
- semihosting_write_fields();
- semihosting_set_field();
are not referenced outside the file.
Make them static.
Change-Id: Ia8d35554673145fdfe0e501543eb18919863039f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8551
Tested-by: jenkins
The function esirisc_jtag_get_eid() is not used outside the file.
Make it static.
The function esirisc_jtag_disable_debug() is never used.
Make it static and mark it as unused.
Change-Id: I5c99cbf77cc9c527b6e18a3f67caa24f8551d09c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8550
Tested-by: jenkins
The functions:
- mpsse_divide_by_5_config();
- mpsse_purge();
- mpsse_rtck_config();
- mpsse_set_divisor();
are not referenced outside the file.
Make them static.
Change-Id: Id6930183a3ce26693b2113f622046168ba289df8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8544
Tested-by: jenkins
The functions:
- interface_jtag_add_callback();
- interface_jtag_add_callback4();
are not referenced outside the file.
Make them static.
Change-Id: I84f738309d23c8d0b5329aa04436db750cf185e5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8543
Tested-by: jenkins
The functions:
- jtag_error_clear();
- jtag_tap_count();
are not referenced outside the file.
Make them static.
Change-Id: I00fcf06b1838b9f6c955c19772f1d41d486459e9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8542
Tested-by: jenkins
